$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

New Item Badge
V-Power Nickel Spark Plug for 1961-1994 Chevrolet, International, GMC and Other Makes [M14-1.25 Thread, 0.750 in. Reach]
InfoVehicle Info Needed
NGK SPARK PLUGSPART NUMBER: 739-GR5

V-Power Nickel Spark Plug for 1961-1994 Chevrolet, International, GMC and Other Makes [M14-1.25 Thread, 0.750 in. Reach]

$399
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]

JEGS

Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]

Part Number : 555-80509
$1799$20.99
You Save$3.00
Spark Plug Gauge & Gap Tool

JEGS

Spark Plug Gauge & Gap Tool

Part Number : 555-W162C
$499$5.99
You Save$1.00
Spark Plug Thread Chaser 14mm and 18mm

JEGS

Spark Plug Thread Chaser 14mm and 18mm

Part Number : 555-80507
$949$10.99
You Save$1.50
Spark Plug Boot Puller [Adjustable]

JEGS

Spark Plug Boot Puller [Adjustable]

Part Number : 555-W80519
$2099$23.99
You Save$3.00

Hot-Medium Heat Range
V-Power Nickel Spark Plug
  • 1961-1994 Chevrolet, International, GMC and Other Makes
  • See Fitment Tab for All Applications
  • M14-1.25 Thread
  • 0.750 in. Reach
  • 13/16 in. Hex
  • Flat Seat
  • Heat Range 5
  • 0.040 in. Pre-Gap
  • Sold Individually

    The NGK GR5 V-Power Nickel spark plug is a replacement plug for 1961-1994 Chevrolet, International, GMC and other makes. It has M14-1.25 threads, a 0.750 in. reach, a 13/16 in. hex and a heat range of 5. A V-groove cut in the nickel alloy center electrode improves ignitability over a flat-tip nickel plug.

    NGK GR5 V-Power Nickel Spark Plug Features:

    • Fits 1961-1994 Chevrolet, International, GMC and Other Makes; see Fitment tab for all applications
    • M14-1.25 metric thread with 0.750 in. reach
    • 13/16 in. hex
    • Flat seat with crush washer installed
    • Heat range 5
    • 0.040 in. factory pre-gap
    • Nickel center electrode tip with nickel ground electrode tip
    • Resistor type (5000 ohm) for ignition noise suppression
    • Non-removable nut terminal
    • 2.200 in. insulator height
    • V-groove cut in the nickel alloy center electrode improves ignitability over a flat-tip nickel plug
    • Copper core center electrode draws heat away from the firing end
    • Alumina silicate ceramic insulator for high dielectric strength
    • Trivalent metal plating resists corrosion and thread seizing
    • Intended for engines that originally used nickel alloy plugs, not as a replacement for factory precious metal plugs
    • Sold individually
    • Modern, lean-burning, fuel-efficient engines call for new lower sparking voltage requirements. NGK Spark Plugs responded by developing V-Power Spark Plugs with V-groove center electrodes. The V-groove center electrode forces the spark to the ground electrode's outer edge, placing the spark closer to the air/fuel mixture to ignite it quicker for more complete combustion (thus greater power & less harmful emissions).

      Show More

      Today's performance engines are often high-compression/high-stress: supercharged, turbocharged, or fed by nitrous oxide. Ideal for high-performance street and race cars, NGK's patented V-groove design allows an ignition system to spark easily in such dense air/fuel mixtures. The flame kernel grows rapidly and enables an engine to potentially make more power because it's operating more efficiently. As a bonus, the spark's outer edge location helps limit the quenching effect, reducing misfires caused by high cylinder pressures "blowing out" the spark. V-Power Spark Plugs also use lower ignition firing voltage, which results in faster starts and easier cold starts throughout the life of the plugs. Sold individually.

      JEGS Easy Kits are designed by JEGS Professionals to help you get all the performance parts you need.

    Part TypeSpark Plug
    Product LineNGK V-Power Spark Plugs
    BrandNGK SPARK PLUGS
    Package Height0.9
    Package Width1.0
    Package Length3.2
    Weight0.15 PG
    Part CategoryReplacement Parts
    Pre-Gap Size0.040 in
    Ground Electrode Quantity1
    Washer TypeCrush
    Ground ConfigurationJ-Gap
    Center Electrode Core MaterialCopper
    Thread Type StandardMetric
    Short Style Spark PlugNo
    Washer(S) IncludedYes
    Seat TypeFlat
    Insulator Height2.200 in
    Center Electrode Tip MaterialNickel
    Center Electrode Insulator Tip Projection0.160 in
    Ground Electrode Core MaterialNickel
    Ground Electrode Tip MaterialNickel
    Resistor TypeYes
    Manufacturer Heat Range5
    Reach0.750 in
    Ground Electrode Tip DesignStandard
    Electrical Terminal TypeNon-Removable Nut
    Center Electrode DesignStandard
    QuantitySold Individually
    Thread SizeM14-1.25
    Center Electrode ProjectionMid Projection
    SkirtNo
    Resistance5000 ohm
    Insulator MaterialCeramic
    MetallurgyCopper
    Part FitmentDirect Fit
    Hex Size13/16 in
    Vendor Part NumberGR5
    Package Qty1
    Package TypeEA

    ITEM YOU MAY ALSO CONSIDER

    Spark Plug

    ACDELCO

    Spark Plug

    Part Number : 065-R42XLS
    $354
    SPARK PLUG

    ACDELCO

    SPARK PLUG

    Part Number : 065-R43XLS
    $227
    E3 Spark Plug 14mm

    E3 SPARK PLUGS

    E3 Spark Plug 14mm

    Part Number : 368-E3.22
    $497$7.99
    You Save$3.02
    E3 Spark Plug 14mm

    E3 SPARK PLUGS

    E3 Spark Plug 14mm

    Part Number : 368-E3.34
    $517$8.49
    You Save$3.32
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning