
NOVI 1200SL Supercharger System 1964-68 Mustang (Passenger Side Mount)
Specs:
- 52,000 Max RPM
- 22 Max psi
- 1,150 Max cfm
- 775 Max HP
- Requires battery relocation
- Included alternator spacer works with Ford alternators only (3" mounting shoulder)
Emissions: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles & vehicles used solely for the purpose of closed competition racing.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are those vehicles that are used exclusively for competition that are not registered, will never become registered, and will never be used on streets or highways.
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
*Installation of parts that are not CARB-approved on a pollution-controlled vehicle in the State of California, or in any state that has adopted CARB emissions standards, may result in the Department or Bureau of Motor Vehicles (DMV or BMV) revoking the vehicle registration and certificate of ownership (title), refusing the transfer of registration, and/or the vehicle failing smog inspection. Law enforcement may cite you for the use of an illegal aftermarket part and seize your title and license plate.*
As a tribute to the Paxton supercharged Shelby GT-350 of the 1960s, Paxton offers current systems for Ford Mustang carbureted V8s. With HP gains ranging from 30% to 75% depending on engine build, the NOVI 1200 or 1500 nearly silent, gear-driven supercharger will yield street superiority.
Features
- Designed to fit under stock hoods
- Required belts and pulleys for use in V-belt setup
- Aluminum discharge tube with Bosch compressor bypass valve
Show More
- Billet aluminum mounting plate for alternator and supercharger drive assembly
- Optional PowerHat Carburetor Assembly (details in More Info with applicable part numbers)
- Linkage arms, splined shaft, and left/right spherical rod ends for simple throttle connection & adjustment
Two Configurations
- Passenger Side Mount (allows use of factory power steering)
- Driver Side Mount (requires an alternator in place of a generator where applicable)
![]() | ![]() |
Tech Notes:
- Not compatible with generator-equipped vehicles
- Included air filter may interfere with some valve covers
- Carburetor enclosure is compatible with small diameter distributor cap only
- Throttle linkage compatible with 1964-68 Mustang only (other years/vehicles will need custom throttle linkage construction)
- Stock compression ratio is recommended. If other than the factory manifold (standard rise) is used, a cowl hood may be needed.
![]() |







