Installation Kit 1964-66 Ford Mustang
Product Discontinued
RETROSOUNDPART NUMBER: 700-125-54-74

Installation Kit 1964-66 Ford Mustang

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Vehicle Installation Kits - Ford
Installation Kit
  • 1964-66 Ford Mustang
  • Chrome Bezel with Black Dot Front/Chrome Rear Knobs

    Motor1 Motor 1:

    • Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) with RDS 87.5-107.9MHz
    • Antenna Terminal External Antenna Connector
    • Usable Sensitivity 12.5 dBf
    • Selectivity 75 dB @ 400kHz
    • Signal to Noise Ratio 62 dB (Stereo), 67 dB (mono)
    • Harmonic Distortion @ 1 kHz 0.8% (stereo), 0.5% (mono)
    • Separation 32 dB @ 1kHz
    • Frequency Response 30-16,000 Hz
    • AM (EU and US Tuning Capable)
    • Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) 530-1710 kHz
    • Antenna Terminal External Antenna Connector
    • Dimensions (radio face & push-buttons only) 3.5”W x 1.5” H x 1.05” D
    • Dimensions (radio body) 3.96”W x 1.98”H x 4.30”D
    • Power Requirements 11.5-14.4 volts
    • Current Consumption (during operation) Max. 15A
    • Current Consumption (car off)Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) 18x4 watts RMS 40x4 Max Power
    • Output Impedance 4-8ohm
    • AUX Input (AUX cable length, 8”) >300 mV / 6 kΩ

     

    • The RetroSound Retro Classic Radio represents RetroRadio's core product. Do you want a radio with all the quality of the Model Two Radio but don't need the extra features? The RC-900C brings you back to the basics and is the radio for you: The Retro Classic features authentic push-button styling and an AM/FM tuner with 30 pre-sets. A rear-mounted auxiliary input is included to play portable devices such as an MP3 player, iPod or portable satellite radio. A built-in 18 watts x 4 channel RMS amplifier provided plenty of power to your speakers. Retro Classic features the patented InfiniMount adjustable shaft system to make installation easy in virtually any classic vehicle.

      The optional Vintage Radio Dial Screen Protectors allow you to add authenticity and style to your receiver while still allowing you to see the digital numbers behind the graphics. They're easy to apply, they look great, and they'll help prevent scratches and everyday damage.


      General Features
    • AM/FM tuner with 30 pre-sets (12 AM and 18 FM)
    • Authentic push-button styling
    • Rear Auxiliary input for portable devices
    • Built-in amplifier (18 watts RMS/40 watts peak x 4 channels)
    • Patented InfiniMount adjustable shaft system
    • Body can be mounted remotely for custom installation using optional extension cable
    • Power antenna lead and amp turn on lead included
    • Compatible with all RetroSound installation kits

      Audio Features
    • AM/FM tuner with 30 pre-sets (18 FM/12 AM)
    • User-controlled bass/treble/fader/balance adjustment
    • 18 watts x 4 channel RMS power amplifier

      Expandability
    • Input: Rear Auxiliary input
    • Separate Power Antenna & Amp turn on lead(s)

      Note: Vehicle Installation Kits are sold separately below and are required to complete radio installation.
    Part TypeRadio Installation Kit
    Product LineRetroSound Retro Classic Radio
    BrandRETROSOUND
    Package Height1.0
    Package Width3.8
    Package Length7.0
    Weight0.31 PG
    Part CategoryAccessories
    Vendor Part Number125-54-74
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!