
Motor1 W/BLK FACE
Motor1 Motor 1:
- Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) with RDS 87.5-107.9MHz
- Antenna Terminal External Antenna Connector
- Usable Sensitivity 12.5 dBf
- Selectivity 75 dB @ 400kHz
- Signal to Noise Ratio 62 dB (Stereo), 67 dB (mono)
- Harmonic Distortion @ 1 kHz 0.8% (stereo), 0.5% (mono)
- Separation 32 dB @ 1kHz
- Frequency Response 30-16,000 Hz
- AM (EU and US Tuning Capable)
- Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) 530-1710 kHz
- Antenna Terminal External Antenna Connector
- Dimensions (radio face & push-buttons only) 3.5”W x 1.5” H x 1.05” D
- Dimensions (radio body) 3.96”W x 1.98”H x 4.30”D
- Power Requirements 11.5-14.4 volts
- Current Consumption (during operation) Max. 15A
- Current Consumption (car off)Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) 18x4 watts RMS 40x4 Max Power
- Output Impedance 4-8ohm
- AUX Input (AUX cable length, 8”) >300 mV / 6 kΩ
A Classic Radio Appearance meets Modern Technology
The RetroSound Motor1 Radio features basic modern technologies with an original classic radio appearance, perfect for vintage vehicle owners that want a simple, easy-to-use radio. It features authentic push-button styling, an AM/FM tuner with 30 presets, a rear-mounted auxiliary input, built-in 18 watts RMS x 4 channel amplifier, and now a non-volatile memory and improved circuit board with built-in noise suppression. The Motor1 is available in two styles, a chrome face and button assembly or a black face and button assembly, and also includes RetroSound's patented InfiniMount adjustable shaft system to make installation easy in virtually any classic vehicle.