Track OrderOrder Status & ReturnsHelpGift CardsHelpHelp CenterPhone1-800-345-4545
Shop by Category

Most Popular

Restoration

Shop All Categories

Shop New ProductsShop ALL BrandsTech ArticlesDeals
MY ACCOUNT
Order Status & Returns
CONTACT USHELP CENTER
Logo
Cart0
$000
New Item Badge
Made in USA
Half Ring And Pinion Installation Kit Fits Chrysler 8.25/8.375 in. Incl. Cover Gasket/Crush Sleeve/Pinion Shims
InfoVehicle Info Needed
RICHMOND GEARPART NUMBER: 836-83-1071-B

Half Ring And Pinion Installation Kit Fits Chrysler 8.25/8.375 in. Incl. Cover Gasket/Crush Sleeve/Pinion Shims

$4399
ShippingShips on 11/03/2026
Lowest PriceLowest Price Guarantee

Ring and Pinion Installation Kit
  • 2001-2013 Chrysler, Dodge, Jeep and Ram Models
  • See Fitment Tab for All Applications
  • Chrysler 8.25 in./8.375 in. Axle
  • Rear Differential
  • Bearings Not Included
  • Sold as a Kit

    This Richmond Gear installation kit has the seals, shims and hardware needed to install a ring and pinion in a Chrysler 8.25 in./8.375 in. differential when the existing bearings are being reused. It keeps the setup parts together so the gear set can be installed and adjusted in one job.

    Richmond Gear 83-1071-B Chrysler 8.25 in./8.375 in. Installation Kit Features:

    • Fits 2001-2013 Chrysler, Dodge, Jeep and Ram models; see Fitment tab for all applications
    • Includes pinion seal, pinion nut, ring gear bolts and crush sleeve or preload shim pack
    • Includes pinion and carrier shims, cover gasket or RTV, marking compound, brush and thread locking compound
    • Bearings not included

    • High-Quality Installation Components for Your Differential

    Richmond Gear Differential Installation Kits are a must-have when overhauling an axle or replacing a ring & pinion set. Differential service kits are convenient for getting the parts needed in one package at a great price.

    Show More

    Half Kit

    • Pinion shims and seal
    • Crush sleeve
    • Cover gasket

    Complete Kit

    • Pinion shims, seal, bearings, nut, and washer
    • Crush sleeve
    • Cover gasket
    • Ring gear bolts and washers
    • Thread locker
    • Gasket sealer
    • Marking compound and application brush

    Mega Kit (For a total rear rebuild)

    • Pinion shims, seal, bearings, nut, and washer
    • Crush sleeve
    • Cover gasket
    • Ring gear bolts and washers
    • Axle bearings and seals
    • Thread locker
    • Gasket sealer
    • Marking compound and application brush
    Part TypeRing and Pinion Installation Kit
    Product LineRichmond Gear Differential Installation Kits
    BrandRICHMOND GEAR
    Package Height3.3
    Package Width13.0
    Package Length13.9
    Weight2.06 PG
    Part CategoryReplacement Parts
    Differential Case Design TypeChrysler 8.25 in./8.375 in.
    PositionRear
    QuantitySold as a Kit
    Part FitmentDirect Fit
    Vendor Part Number83-1071-B
    Package Qty1
    Package TypeEA

    Items You Need

    Marking Compound Kit 1/2 ounce

    RICHMOND GEAR

    Marking Compound Kit 1/2 ounce

    Part Number : 836-35-0007-1
    $1196
    Dial Indicators [1 in Travel, 0.001 in Increments, Magnetic Base]

    ALLSTAR PERFORMANCE

    Dial Indicators [1 in Travel, 0.001 in Increments, Magnetic Base]

    Part Number : 049-ALL96414
    $4999
    1/4 in.Drive Inch Pound Beam Torque Wrench [0-80 in/lb & 0-9 Newton Meters ]

    JEGS

    1/4 in.Drive Inch Pound Beam Torque Wrench [0-80 in/lb & 0-9 Newton Meters ]

    Part Number : 555-M195
    $3199$35.99
    You Save$4.00
    1/2 in. Drive 250 ft/lb Torque Wrench

    JEGS

    1/2 in. Drive 250 ft/lb Torque Wrench

    Part Number : 555-M199
    $11699$128.99
    You Save$12.00
    Pinion Yoke Wrench Fits Various Different Yokes from 2.75 in. to 5.25 in. Wide

    JEGS

    Pinion Yoke Wrench Fits Various Different Yokes from 2.75 in. to 5.25 in. Wide

    Part Number : 555-81656
    $3099$33.99
    You Save$3.00
    Universal Bearing Separator and Puller Set

    MISHIMOTO

    Universal Bearing Separator and Puller Set

    Part Number : 690-MMTL-BSP
    $4395
    Dead Blow Hammer Set [3-Piece]

    JEGS

    Dead Blow Hammer Set [3-Piece]

    Part Number : 555-81754
    $3299$39.99
    You Save$7.00
    Punch & Chisel Set [7-Piece]

    JEGS

    Punch & Chisel Set [7-Piece]

    Part Number : 555-W7510
    $1399$15.99
    You Save$2.00
    Gray RTV Temperature Resistant up to 625 degrees F

    JEGS

    Gray RTV Temperature Resistant up to 625 degrees F

    Part Number : 555-28036
    $799$8.99
    You Save$1.00
    Brake Parts Cleaner [14 oz. Aerosol Can]

    JEGS

    Brake Parts Cleaner [14 oz. Aerosol Can]

    Part Number : 555-72311
    $699$7.99
    You Save$1.00
    Drain Pan [7 Quart]

    JEGS

    Drain Pan [7 Quart]

    Part Number : 555-W4070
    $499$5.99
    You Save$1.00
    Manual Fluid Extractor Pump [2.377 Gallon (9 Liters) Capacity]

    JEGS

    Manual Fluid Extractor Pump [2.377 Gallon (9 Liters) Capacity]

    Part Number : 555-23560
    $7099$96.99
    You Save$26.00
    3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]

    JEGS

    3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]

    Part Number : 555-80038
    $17999$197.99
    You Save$18.00
    6-Ton Jack Stands

    JEGS

    6-Ton Jack Stands

    Part Number : 555-80037
    $8099$89.99
    You Save$9.00
    Industrial Nitrile Gloves [6 mils Thick, Medium]

    JEGS

    Industrial Nitrile Gloves [6 mils Thick, Medium]

    Part Number : 555-1133
    $872$10.90
    You Save$2.18
    Safety Goggles

    JEGS

    Safety Goggles

    Part Number : 555-W1024
    $599$6.99
    You Save$1.00
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!