

RON FRANCIS WIRINGPART NUMBER: 788-TDZ75SD
Speed Density Fuel Injection Wiring Harness for Mustangs and Broncos With Ford 302 Engines
$77495
Items You Need
Stand-Alone Speed Density EFI Wiring HarnessMustangs and Broncos Ford 302 Speed Density Engines Requires Sequential ECM and TFI Distributor Complete Kit
This stand-alone fuel injection harness wires a speed density (non-mass air flow) Ford 302 into a Mustang or Bronco. It is finished and sized to fit like the factory harness.
Ron Francis TDZ75SD Ford 302 Speed Density Harness Features:
- Works with speed density, non-mass air flow Ford 302 engines
- Requires sequential injector fired ECM and TFI distributor as found on Ford Mustang and passenger car 5.0 engines
- Direct fit, sized for Mustang and Bronco applications
- Finished with high-temp zip loom and harness wrap tape
- Includes firewall grommet and complete instructions
Part TypeFuel Injection Wiring Harness
BrandRON FRANCIS WIRING
Package Height5.62
Package Width12.0
Package Length15.0
Weight7.0 PG
Part CategoryPerformance Parts
QuantitySold as a Kit
Part FitmentSemi Universal
Vendor Part NumberTDZ75SD
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations
![Under-Dash Creeper [40 in. Length]](https://www.jegs.com/images/mini_200/500/555/555-81153.jpg)

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Crimp Tool for Open Barrel Terminals [56 Series]](https://www.jegs.com/images/mini_200/700/788/788-ct56.jpg)







![Braided Fabric Heat Shrink Wire Covering [1 in., 10 ft., Black]](https://www.jegs.com/images/mini_200/700/788/788-bw10.jpg)
![Cable Ties [3.500 in., Black]](https://www.jegs.com/images/mini_200/700/788/788-ct30.jpg)
![Step Drill Bit Set [2-Piece]](https://www.jegs.com/images/mini_200/500/555/555-w9004.jpg)