HD Steering Kit with V2 Stabilizer Combo for 1984-2006 Jeep Vehicles
InfoVehicle Info Needed
ROUGH COUNTRYPART NUMBER: 834-10613V2

HD Steering Kit with V2 Stabilizer Combo for 1984-2006 Jeep Vehicles

$42995
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

  • 1984-2001 Cherokee XJ, 1986-1992 Comanche MJ, 1997-2006 Wrangler TJ
  • 4 in. Lift Minimum, Stock Pitman Arm Required
  • 1.5 in. Thick-Wall DOM Steel Tubing
  • Sold as a Kit
  • Includes
    • HD Steering Kit
    • V2 Stabilizer


    Rough Country 10613V2 is an HD steering kit with V2 stabilizer combo for lifted Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, Wrangler TJ, and Wrangler Unlimited LJ builds that need stronger steering hardware for trail use. The system replaces vulnerable factory tie rod and drag link components with heavy-duty DOM steel tubing, adds a V2 steering stabilizer to help control steering vibration, and is built for Jeeps that see rocks, ruts, and other off-road impacts.

    Rough Country 10613V2 Installation Notes:

    • 1.5 in. thick-wall DOM steel tubing gives the steering linkage added rigidity compared with weak factory tie rod and drag link components.
    • Increased clearance between the tie rod and differential cover helps reduce the chance of steering damage on rocks, ruts, and trail debris.
    • Rotational, non-articulating joints help limit unwanted steering movement and are designed to reduce bump steer for a more controlled feel on road and off road.
    • Integrated wrench flats support easier installation, toe adjustment, and steering adjustment without guessing where to grip the tubing.
    • V2 steering stabilizer helps dampen steering vibration and improve driver control when larger tires and rough terrain put more load into the front end.

    Includes:

    • HD steering linkage components
    • V2 steering stabilizer

    This kit is intended for lifted Jeep front ends that need stronger steering components for off-road driving, especially where the factory tie rod and drag link are exposed to impacts from rocks, logs, and deeply rutted trails.

    Fits listed left-hand-drive Jeep applications only, including Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, Wrangler TJ, and Wrangler Unlimited LJ. Requires 4 in. or more suspension lift and must be used with a stock pitman arm to maintain proper steering geometry. Factory wheels cannot be used because of backspacing limitations, and a 16 in. or larger aftermarket wheel is advised. Installation requires a 7 degree ball joint reamer tool. Not compatible with right-hand-drive applications.

  • Part TypeSteering Kit
    BrandROUGH COUNTRY
    Package Height5.0
    Package Width10.0
    Package Length90.0
    Weight44.17 PG
    Part CategoryPerformance Parts
    Part FitmentDirect Fit
    Vendor Part Number10613V2
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!