Rydeen GPS4000 Features:

GPS4000 allows installers to have the option of controlling the front sensors using GPS. The simple 4 wire hook-up will require power, ground and brake wire connections. GPS4000 will allow the front sensors to only to operate at speeds 5MPH or lower. Installers will no longer have to add any switching and consumers will not have to worry about turning the system ON when pulling into a parking space. As an optional part for the PSR4000 digital parking sensors, The GPS4000 is used as a switch when the user needs to limit the starting speed of the front sensor. When the vehicle speed is less than 5MPH, the front sensor function will engage with the brake signal input; when the vehicles speed is higher than 5MPH, the front sensor function will turn off. With this feature, the front sensor will automatically turn on the detection when driving in low speed, effectively helping customers park. It also avoids unnecessary alarms when driving on highways.

• Allows the front sensors to operate at speeds 5MPH or lower
• Automatic speed detection by GPS
• Adding a switch no longer needed and consumers will not have to worry about turning the system ON when pulling into a parking space in low speed
• Also avoids unnecessary alarms when driving on highways
• Simple 4 wire hook-up will require power, ground and brake wire connections
• An optional part for the PSR4000 digital parking sensor and PSK4 add-on kits when used as front sensors
• Note: It may take up to 2 minutes for the GPS connection to establish