Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
![Caster/Camber Sleeve for 1980-1997 Ford Bronco, F-150, F-250, F-350 with Twin Traction Beam [2 Degree]](https://www.jegs.com/images/mini_750/800/827/827-23108.jpg)
Vehicle Info NeededCaster/Camber Sleeve for 1980-1997 Ford Bronco, F-150, F-250, F-350 with Twin Traction Beam [2 Degree]
Ships on 11/03/2026
Lowest Price GuaranteeThis SPC Performance caster/camber sleeve replaces the upper ball joint sleeve on 1980-1997 Ford Bronco, F-150, F-250 and F-350 models with the twin traction beam Dana 44 front axle. It changes caster, camber or both by 2 degrees, and rotating the sleeve 45 degrees splits the change between the two.
SPC Performance 23108 Caster/Camber Sleeve Features:
- Fits 1980-1997 Ford Bronco, F-150, F-250, F-350
- Changes caster, camber or both at the same time
- 2 degree adjustment
- Clear zinc coating for corrosion resistance
- Install the zero-degree sleeve (SPC 23109) first to measure the required change
- Recommended tool: SPC 77880 sleeve puller
- One sleeve required per wheel
Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve p/n 827-23109 to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn. 1 sleeve is required per wheel. Sold individually.
Applications:
- 1980 and up: F250/F350/E250/E350/E450/Full Size Bronco with Ball Joints
- 1980-96 F150/250 (L/D)
