
23194 3-1/2 Camber/Caster Sleeve Ford Bronco II 1989-1990, Ford E-150 2003-2014, Ford E-150 Club Wagon 2003-2005, Ford E-150
SPC 23194 Features:
This sleeve will easily change Camber and/or Caster 3.50° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to determine the required change, then install the correct degree sleeve. Note: Sleeves adjust to a smaller degree on Ford & Mazda 4WD light truck/SUV vehicles.
- Easily change caster / camber or both at the same time
- Clear Zinc coating for corrosion resistance
- Recommended Tools: 77880 - Sleeve Puller
- Front Adjustment Range RWD: Camber/Caster ±3.50°
- Front Adjustment Range 4WD: Camber/Caster ±2.75°
- Required: 1 per wheel

![Tie Rod End and Pitman Arm Puller [Opening size: 1 1/8 in. (27 mm)]](https://www.jegs.com/images/mini_200/500/555/555-80620.jpg)

![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)

![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)


![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)
![Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81565.jpg)

![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)