Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededSTRANGE ENGINEERINGPART NUMBER: 873-A1033
C-Clip Eliminator Kit 1978-84 GM G-Body
$23299
Ships on 11/04/2026
Lowest Price GuaranteeGM Stock Housing End: As found in 1978-84 Malibu, Monte Carlo, and Cutlass
- C-Clip Eliminator Kit
- GM 10-Bolt 8.2 in.
- GM 10-Bolt 8.5 in.
- GM 12-Bolt 8.875 in.
- Stock Axles in Factory Housing Ends
- Street/Strip and Oval Track Use
- 2/pkg
Does not fit 7.5" and 7.625" GM housing ends
- Safety hubs, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When a stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's safety hubs eliminate wheel loss and worn bearing areas. The bearings are retained, and axles are secured by the safety hubs that are bolted to the stock axle housing through the existing backing plate holes. Drag Racing Only Kits feature low-friction ball bearings while Street/Strip and Oval Track Kits utilize roller bearings. Except #873-A1098, kits are not compatible with ABS.
Part TypeRear End Housing
Product LineStrange Engineering C-Clip Eliminator Kits
BrandSTRANGE ENGINEERING
Package Height3.9
Package Width4.7
Package Length5.1
Weight5.17 PG
Part CategoryPerformance Parts
C-Clip Eliminator MaterialBillet aluminum
QuantitySold as a kit
Part FitmentSemi Universal
C-Clip Eliminator FinishMachined
Vendor Part NumberA1033
Package Qty1
Package TypeEA
No Questions
No Reviews
ITEM YOU MAY ALSO CONSIDER
MOSER ENGINEERING
9200 C-Clip Eliminator Kit For Stock Axles (1.400" Seat)
Part Number : 718-9200
$21000
MOSER ENGINEERING
Part Number : 718-9200
$21000
Some parts are not legal for use in California or other states with similar laws / regulations
