$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

130052-1-KIT Fully Loaded Six Shooter Knuckle Kit, 1979-1995 Toyota Pickup Truck, 1984-1995 Toyota 4Runner, Fits Solid Front Axl
InfoVehicle Info Needed
TRAIL GEARPART NUMBER: 542-130052-1-KIT

130052-1-KIT Fully Loaded Six Shooter Knuckle Kit, 1979-1995 Toyota Pickup Truck, 1984-1995 Toyota 4Runner, Fits Solid Front Axl

$62999
2 left in stock
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

Items You Need

186115-1-KIT Super Metal Knuckle Stud Hardware Kit for 1979-1985 Toyota Front Solid Axle Knuckle

TRAIL GEAR

186115-1-KIT Super Metal Knuckle Stud Hardware Kit for 1979-1985 Toyota Front Solid Axle Knuckle

Part Number : 542-186115-1-KIT
$14399
Penetrating Oil [11 oz. Aerosol Can]

LUCAS OIL

Penetrating Oil [11 oz. Aerosol Can]

Part Number : 639-11043
$878$9.49
You Save$0.71
Brake and Parts Cleaner [14 oz. Aerosol Can]

JEGS

Brake and Parts Cleaner [14 oz. Aerosol Can]

Part Number : 555-72312
$699$7.99
You Save$1.00
Fender Cover with Pocket [23 in. W x 31 1/2 in. L]

JEGS

Fender Cover with Pocket [23 in. W x 31 1/2 in. L]

Part Number : 555-65010
$839$16.99
You Save$8.60

Knuckle
Fully Loaded Six Shooter Knuckle Kit
  • 1979-1995 Toyota Pickup Truck
  • 1984-1995 Toyota 4Runner
  • Fits Solid Front Axle Housing
  • Left-Hand Drive
  • Includes:
    • (2) Knuckles
    • (2) Steering Arms
    • (1) Shim Pack

      Trail-Gear 130052-1-Kit Fully-Loaded Six-Shooter Knuckle Kit

      After years of development and testing, these knuckles and steering arms have set a new standard in Toyota knuckle strength and reliability. The Fully Loaded Six Shooter Kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker than stock material and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail Gear can deliver.

      Included in The Fully Loaded Six Shooter Kit is a special 6 hole shim pack for use between the top of the knuckle and the steering arm. Also included is a 1/2" coarse thread bolt to help remove the steering arms for knuckle service. To remove the steering arms, remove all 6 nuts, then install the bolt in the top of the arm. As the bolt is tightened, the steering arm is pulled up off the knuckle. Stock lower bearing plates and shims from your old knuckles are needed for knuckle assembly. A minimum of four additional steering arm studs is needed for installation.

      Note:

    • All the Parts you Need to Service your Steering Knuckles!

      The steering knuckles are a neglected part of many off-road vehicles. This is especially bad on rock crawlers, as the extreme terrain causes terrible stress on steering linkages. These kits include all parts needed to do a complete service job on the left and right steering knuckles. Trail-Gear exclusively includes outer felt covers in the steering knuckle service kits.

    Part TypeSteering Knuckle
    Product LineTrail Gear Steering Knuckle/Service Kits
    BrandTRAIL GEAR
    Package Height7.6
    Package Width12.3
    Package Length20.7
    Weight38.8 PG
    Part CategoryReplacement Parts
    Hub IncludedNo
    Vendor Part Number130052-1-KIT
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning