Trail-Gear 130303-KIT Features:

The Trail-Gear Power Flow 1650 PSI Power Steering Pump has been designed and engineered to provide ultimate performance in hydraulic ram steering applications . It is a direct replacement for "TC" and "CB" style pumps.

The body of the pump is constructed of steel to increase reliability and decrease wear. It is equipped with heavy-duty hardened internals, large bushings and an oversized shaft making it ideal for high HP motors with greater radial loads.

The Power Flow Pump has one of the highest flow rates in the industry and maintains flow consistency across all RPMs. It will not bypass early.

• 1650 PSI Pump Engineered For Ultimate Performance
• All Steel Body
• Heavy-Duty Heat-Treated Internals, Large Bushings, and Oversized Shaft
• Endurance Tested at 400 F
• Steady Flow Across All RPM
• Direct Replacement for "TC" and "CB" Style Pumps
• Each Pump is Bench Tested for Quality Assurance
• Flow Rate = 9.4 mL per revolution (17.4 gallons per minute at 7,000 RPM Max. Speed)

IMPORTANT NOTES:

Warning! The Power Flow™ Power Steering Pump has a maximum rotational speed of 7,000 RPM. Do not drive the pump beyond 7,000 RPM! If you intend to use the pump in a custom build, you will need to calculate the correct pump pulley size to ensure that you never drive the pump beyond 7,000 RPM. Please consult our Power Flow™ Power Steering Pump Pulley Diameter Calculation PDF for the formula and a practical example of how to do this. You may also contact our Technical Support at 1.877.4X4.TOYS or 559-252-4950 or by email at [email protected] for additional assistance with your calculations or with any other aspect of your build.

Use of anything other than a Power Steering Pulley Puller/Installer to install or remove a pulley from your Power Flow™ Power Steering Pump will void the warranty!

Pump operates in the clockwise configuration