STM-Stage2 Clutch Kit, Suzuki Samurai Stage 2 Dual Surface Performance
Product Discontinued
TRAIL GEARPART NUMBER: 542-STM-STAGE2

STM-Stage2 Clutch Kit, Suzuki Samurai Stage 2 Dual Surface Performance

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Suzuki
Clutch Kit
  • Suzuki Samurai 1986-1995 Stage 2 Dual Surface Performance

    Trail-Gear STM-STAGE2 Features:

    Suzuki Samurai clutches are small and prone to failure when matched against a high horsepower engine and large off-road tires. The Low Range Off-Road Stage 2 performance clutch kit is one of the most respected aftermarket Samurai clutches in the world. We build our clutches with a dual surface friction material, organic on one side and ceramic on the other. Ceramic offers superior longevity to common woven glass or organic material. Ceramic is a great material for clutch disks because of its extreme duty friction characteristics. Using 8 ceramic pads ensures great engagement without compromising drivability. This kit offers a much higher coefficient of friction than your factory clutch. Increased friction= more power to the wheels.

    We use organic friction material on the other side to reduce chatter and provide a closer to stock clutch feel. This clutch can be used and abused but won't wear out your leg and foot. This is simply the planets' best all around Samurai clutch.

    The clutch pressure plate is far better than many other aftermarket clutch covers. We use very high quality Japanese madeDST (Diaphragm Spring Type) clutch covers. Some competitors are painting their covers black. We don't paint our pressure plate covers because theysmoke and cause a terrible smell until the paint burns off.

    • 100% New Clutch Disk
    • 100% New Clutch Cover (Pressure Plate)
    • New Alignment Tool
    • New Pilot Bearing 
    • New Release Bearing (Throwout Bearing)
  • Part TypeClutch Kit
    BrandTRAIL GEAR
    Package Height5.0
    Package Width13.0
    Package Length13.5
    Weight10.305 PG
    Part CategoryPerformance Parts
    Pilot Bushing IncludedYes
    Pressure Plate StyleDiaphragm
    Throwout Bearing IncludedYes
    QuantitySold as a kit
    Mounting Hardware IncludedNo
    Disc MaterialOrganic/Ceramic
    Alignment Tool IncludedYes
    Flywheel IncludedNo
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    Brake and Parts Cleaner [14 oz. Aerosol Can]

    JEGS

    Brake and Parts Cleaner [14 oz. Aerosol Can]

    Part Number : 555-72312
    $679$7.99
    You Save$1.20
    Shop Towels Red

    JEGS

    Shop Towels Red

    Part Number : 555-80184
    $899$9.99
    You Save$1.00
    Industrial Nitrile Gloves [5.5 mils Thick, Large]

    JEGS

    Industrial Nitrile Gloves [5.5 mils Thick, Large]

    Part Number : 555-1127
    $1599$17.99
    You Save$2.00
    Disposable Shop Towels

    JEGS

    Disposable Shop Towels

    Part Number : 555-80187
    $1999$21.99
    You Save$2.00
    5-Piece Pry Bar Set

    JEGS

    5-Piece Pry Bar Set

    Part Number : 555-80024
    $2669$28.99
    You Save$2.30
    Rolling Work Table [200 lb. Capacity]

    JEGS

    Rolling Work Table [200 lb. Capacity]

    Part Number : 555-81420
    $10999
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!