Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- 58cc, 1987-Up Straight Plug-Bare (Each)
Perfect for use on 262-307 cubic inch small blocks.
Material: High density cast iron
Accessory Flange: Stock locations, 7-bolt universal pattern
Recommended Installation Items:
Head Gaskets: Fel-Pro #1003 (265-350) or equivalent.
Puhshrods: OEM can be used. Hardened not required
Spark Plugs: Accepts 14mm-5/8' .460' reach tapered seat or equivalent
Intake Gasket: Fel-Pro #1204 or #1256 or equivalent
Exhaust Gasket: Fel-Pro #1404 or #1405 or equivalent
Bolt-On Up To 30HP!
An improved replacement for the factory Chevrolet 305-400ci cylinder head, World Products exclusive S/R Torquer series features 170cc intake runners and can provide up to a 30 HP increase over most OEM castings. Note, however, that these heads are accepted by many racing associations as ''stock'', and are 50-state emissions legal. S/R Torquer heads accept early and late model accessories. The valve seats are hardened to provide compatibility with unleaded gas.
Show More
The S/R Torquer heads are available in 67cc and 76cc versions for engines up to 1986 and 76cc for 1987-later applications. They are designed to use 2.020'' intake and 1.600'' exhaust valves, and work well in engines from 302 to 400ci. World's S/R Torquer 305 cylinder heads come with 58cc combustion chambers, and are ideally suited for use on 262-307ci small blocks.Technical Specifications
- Material: High density cast iron
- Valve Seats: Integral intake, hardened steel exhaust
- Valve Size: 2.020'' x 1.600''
- Accessory Flange: Stock locations, 7-bolt universal pattern
- Included In Assembly: Erson stainless steel, ring and band valve seals, valve springs, Erson 7° retainers and keepers.
Recommended Installation Items - Head Gaskets: Fel-Pro 375-1003 or equivalent
- Pushrods: OEM can be used, hardened not required
- Screw-in Studs: 3/8" or 7/16" with 7/16"-14 base thread
- Pushrod Guidplates: These heads are not machined for guide plates. If desired Flat 5/16" Erson 601 or equivalent can be used after .125" is milled off the stud bosses and the push rod holes opened
- Spark Plugs: Accepts 14mm-5/8'' .460'' reach tapered seat (Accel 274 or 276, AC-Delco 43TS or 44TS, or equivalent)
- Intake Gasket: Fel-Pro 375-1204 or 375-1256 or equivalent
- Exhaust Gasket: Fel-Pro 375-1404 or 375-1405 or equivalent
