Carburetor Spacer
Located between the carburetor and intake manifold, a carburetor spacer is an optional component that changes how fuel converts from a liquid to vapor. As each engine is different in components and performance, a carb spacer for one may provide improvements while actually decreasing power in a different engine. In racing applications a taller carburetor spacer is helpful at raising the power band of the engine, with more power at higher RPMs. However, there is a trade-off of reduced power at lower RPMs. For street use, the most commonly used carb spacer is a shorter 4-hole version. In the end, experimentation and testing will confirm if a carb spacer will help or hurt engine performance. Also, keep in mind hood clearance limitations any time you raise the height of the carburetor and air cleaner.
When choosing a carburetor spacer for your engine, first confirm the intake manifold and carburetor mounting type (for example square or spread bore, 4500/Dominator, etc.). Next, confirm you have enough space for carburetor and air cleaner under the hood. Then choose either a 4-hole, open, or tapered spacer as well as the material (for example, plastic, aluminum, wood, etc.). From the remaining options choose the one that best fits your needs and budget.
JEGS offers a large carburetor spacer selection from top brands including Speedmaster, Trans Dapt, Moroso, Mr Gasket, JEGS, and many others. Each carburetor spacer is made from high quality materials and production to provide the performance your engine needs.
JEGS Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [2 in. Tall Open Plenum]
- (2) Gaskets
- Mounting Hardware
JEGS Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [1 in. Tall Open Plenum]
- (2) Gaskets
- Mounting Hardware
JEGS Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [1 in. Tall 4-Hole Plenum]
- (2) Gaskets
- Mounting Hardware
Includes:
JEGS Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [1/2 in. Tall Open Plenum]
- (2) Gaskets
- Mounting Hardware
Includes:
Includes:
Includes:
JEGS Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [1/2 in. Tall 4-Hole Plenum]
- (2) Gaskets
- Mounting Hardware
Includes:
JEGS Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [2 in. Tall 4-Hole Plenum]
- (2) Gaskets
- Mounting Hardware
- (2) Open Carb Gaskets
- (4) 2.500 in. Carb Studs
- (4) Hex Nuts
- (4) Washers
Includes: