FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2166K - Edelbrock Performer Manifolds for Ford

Edelbrock 2166K - Edelbrock Performer Manifolds for Ford

Edelbrock#350-2166K

Performer 460 Intake Manifold w/Installation Kit
  • BB-Ford 429-460ci
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm

    Edelbrock 2166K - Edelbrock Performer Manifolds for Ford Details

    Ford 429-460ci V8

    This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, intake gaskets, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs.

    Designed for street 429/460ci Ford V8s. This intake manifold is for 429 & 460 V8s with OEM 4-bbl. carburetor with electric choke 1968-72 (1973 non-CA) except stock equipped EGR. (Intake manifold 350-3766 is for 460ci V8's with OEM 4V carburetor with electric choke 1979-87.) Will not fit 429 Cobra-Jets or 1966-68 462ci Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models.

    Installation Notes:

  • Port exit dimensions: 1.65'' x 1.96''
  • Manifold height: (A) 3.75'' , (B) 4.45'' (same as stock)
    Click here to determine carburetor pad height.
  • Recommended Intake Gaskets: JEGS p/n 555-210306

    Carburetor Recommendations:

    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • carb has manual choke only.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1495.

    Edelbrock Performer 750cfm Carburetor p/n 350-1411.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1495.

    Edelbrock Performer 800cfm Carburetor p/n 350-1413,
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1495.

  • Edelbrock 2166K - Edelbrock Performer Manifolds for Ford

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15845 - JEGS Carburetor Stud Kits
    Only $9.99


    See All Items You Need