Edelbrock 2171 - Edelbrock Performer Manifolds for Ford

Edelbrock #350-2171

Performer 351-M/400 Intake Manifold

Ford 351-400ci Modified

4-bbl Square-Bore Carb Flange (non-EGR)

Idle-5500 rpm

View In Catalog
Accessories
Similar Items

Installation Instructions for Edelbrock 2171 - Edelbrock Performer Manifolds for Ford

Share |

Complete list of Edelbrock Performer Manifolds for Ford

Details
Overview
Accessories
Similar Items

Edelbrock 2171 - Edelbrock Performer Manifolds for Ford Details

Ford 351M-400ci V8

Designed for 400ci Ford V8s produced from 1971 to 1982 with 2V Cleveland heads and 351-M V8s produced from 1975 to 1982. Will not fit 1974 and earlier 351-C V8s. Valley width measures 8-17/32.''

Installation Notes:

Port exit dimensions: 1.24'' x 1.70''

Manifold height: (A) 3.60'' , (B) 4.75''
Click here to determine carburetor pad height.

Recommended Intake Gasket: Fel-Pro 375-MS96020

Carb flange plate p/n 350-2732 is included.

Carburetor Recommendations:

Edelbrock Performer 600cfm Carburetor p/n 350-1405.

carb will work with non-EGR system

Adapter for this carb supplied with manifold

carb has no provision for evaporative canister

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1493.

Edelbrock Performer 600cfm Carburetor p/n 350-1406.

carb will work with non-EGR system

adapter for this carb supplied with manifold

carb has no provision for evaporative canister,

carb acceptable to factory cruise control.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1493.

Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.

carb will work with non-EGR system

Adapter for this carb supplied with manifold

carb has no provision for evaporative canister

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1493.

Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806

carb will work with non-EGR system

adapter for this carb supplied with manifold

carb has no provision for evaporative canister,

carb acceptable to factory cruise control.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1493.

Idle-5500 RPM Power!

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response. Most Performer intakes are 50-state legal, when used with the correct carburetor and in the correct application.