Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2515 - Edelbrock Performer Manifolds for Buick



Edelbrock 2515 - Edelbrock Performer Manifolds for Buick
Edelbrock 2515 - Edelbrock Performer Manifolds for Buick

JEGS Part Number: 350-2515

Buick B-4B Intake Manifold
  • Buick 400-455ci
  • 4-bbl Spread-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm

    Edelbrock 2515 Details

    Buick 400-455ci V8

    Back by popular demand. This intake manifold is a resurrection of the popular B-4B manifold made in the late 1960's for street 400-430-455ci Buick V8's. The only change to the original design is the addition of our proven Performer-style carb pad that accepts either square-bore or spread-bore carburetors, making this manifold an excellent choice for both restorations and performance-minded Buick fans. Recommended Intake Gaskets: Fel-Pro 375-MS96005

    Carburetor Recommendations:
    OEM 4-bbl

  • carb will work with non-EGR system
  • carb has provision for evaporative canister

    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • adapter for this carb supplied with manifold
  • carb has no provision for evaporative canister
  • carb has manual choke only.

    Edelbrock Performer 750cfm Carburetor p/n 350-1411.
    Edelbrock Performer 800cfm Carburetor p/n 350-1413,
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • adapter for this carb supplied with manifold
  • carb has no provision for evaporative canister

    The rear egr/air port on this manifold has to be tapped and plugged with a pipe plug. The reason for this is that earlier heads did not have the provisions for egr in the head.

  • Edelbrock Performer Manifolds for Buick

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 2515

    Engine Make/Size
    Buick 400-455
    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    Without EGR
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    EGR
    Without EGR
    Basic Operating RPM Range
    Idle-5,500
    Carburetor Quantity
    One
    Engine Block Style
    Stock/OEM standard deck
    Intake Finish
    Natural
    Intake Material
    Aluminum
    Intake Section Included
    Complete
    Intake Style
    Dual plane
    Quantity
    Sold individually
    Manufacturer's Part Number:
    2515
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.07

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $7.11

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $6.09

    JEGS Performance Products 15845 - JEGS Carburetor Stud Kits
    Only $8.99


    See All Items You Need