Jegs Free Catalog
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Category
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Edelbrock 60659

Performer Aluminum Cylinder Head for Small Block Chevy Bare

Edelbrock 60659

350-60659

made in usa
jegs shipping
FREE Shipping
Estimated ship date 04/11/17 if Ordered Today
Edelbrock 60659 Performer Aluminum Cylinder Head for Small Block Chevy Bare $587.72
  • 1986-Earlier Small Block Chevy
  • Port Volumes: 185cc/65cc
  • 70cc Combustion Chamber
  • Bare Head, Sold Individually

  • Edelbrock 60659 Details

    1986-Earlier Small Block Chevy

    Combustion Chamber Volume:64cc or 70cc
    Intake Runner Volume:185cc
    Exhaust Runner Volume:65cc
    Intake Valve Diameter:2.02''
    Exhaust Valve Diameter:1.60''
    Valve Stem Diameter:11/32''
    Valve Guides:Manganese Bronze
    Deck Thickness:5/8''
    Valve Spring Diameter:1.46''
    Valve Spring Maximum Lift:0.575''
    Rocker Stud:3/8''
    Guideplate:Hardened Steel
    Pushrod Diameter:5/16''
    Valve Angle:23°
    Exhaust Port Location:Stock
    Spark Plug Fitment:14mm x 3/4'' Reach,
    Gasket Seat


    Valve LiftIntakeExhaust
    .100''6652
    .200''12797
    .300''185127
    .400''230146
    .500''238156
    .600''239162
    .700''N/AN/A
    Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28'' H2O


    Installation Notes: When using stock rockers on S/B Chevy Performer & Performer RPM heads, .100'' longer than stock pushrods are required. Due to valve-to-cylinder bore interference, SB-Chevy heads may not be used on engines with less than 4'' bore (262, 265, 283, 305, 307 c.i.d.) except with camshafts having less than .450'' valve lift.

    Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.

    Heat crossover is machined for 50-state emissions legal performance.

    Specifications:

    Emission
    50 State Legal
    Type
    Bare
    Engine Make/Size
    Chevy Small Block (262-400)
    Usage
    Street/Performance
    Cylinder Head Type
    Standard
    Preparation
    Requires Professional Preparation (Bare)
    Finish
    Cast Aluminum
    Accessory Bolt Holes Drilled
    Yes
    CNC-Machined Combustion Chamber
    No
    CNC-Machined Exhaust Runner
    No
    CNC-Machined Intake Runner
    No
    Combustion Chamber Volume (cc)
    70
    Cylinder Head Finish
    Natural
    Cylinder Head Material
    Aluminum
    Cylinder Head Style
    Bare
    Damper Spring Included
    No
    Exhaust Port Location
    Standard
    Exhaust Port Shape
    Square
    Exhaust Runner Volume (cc)
    60
    Exhaust Valve Diameter (in.)
    1.6
    Exhaust Valves Included
    No
    Guideplates Included
    No
    Heat Crossover
    Yes
    Intake Port Location
    Standard
    Intake Runner Volume (cc)
    185
    Intake Valve Angle
    23
    Intake Valve Diameter (in.)
    2.02
    Intake Valves Included
    No
    Locks Included
    No
    Machined for O-Ring
    No
    Oiling Style
    Through pushrod
    Quantity
    Sold individually
    Retainers Included
    No
    Rocker Arm Nuts Included
    No
    Rocker Arm Studs Included
    No
    Rocker Arms Included
    No
    Steam Holes Drilled
    No
    Valve Cover Mounting Style
    Perimeter bolt
    Valve Guides Included
    No
    Valve Seat Material
    Powdered metal
    Valve Seats Machined
    No
    Valve Springs Included
    No
    Valve Stem Seals Included
    No
    Manufacturer's Part Number:
    60659

    Edelbrock Performer Aluminum Cylinder Heads are designed, cast and manufactured in the USA for unsurpassed quality. The top quality features incorporated into these heads include: highly effecient port design, state-of-the-art combustion chamber shapes, manganese-bronze valve guides, and threaded inserts in the exhaust bolt holes and rocker stud holes for strength and durability. They provide great torque and horsepower up to 5500 rpm and are 50 state emissions legal to fit emissions controlled engines, E.O. Number D-215-49!

    Does Edelbrock 60659 fit your vehicle?

    Narrow Results
    Filter By
    Year
    Filter By
    Make
    Filter By
    Model
    Filter By
    SubModel
    Filter By
    EngineType
    Filter By
    CC
    Filter By
    Liter
    Filter By
    Aspiration

    1978-1979 CHEVROLET MALIBU

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CLASSIC ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967 GMC C25/C2500 SUBURBAN

    • CC: 5358
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1974 GMC C25/C2500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1974 CHEVROLET LAGUNA

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1970-1972 CHEVROLET KINGSWOOD

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976 GMC C1500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980-1986 CHEVROLET BLAZER K5

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978 CHEVROLET C30 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K3500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972-1981 GMC G15/G1500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: VANDURA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1978 GMC C35/C3500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1973 CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: ESTATE
    • Engine Vin: H
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1986 CHEVROLET G10 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SPORTVAN
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET CAPRICE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: K
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977 BUICK CENTURY

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1982-1986 CHEVROLET C10 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 GMC C2500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1968-1969 CHEVROLET CAMARO

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1966 CHEVROLET CHEVELLE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1966-1969 CHEVROLET CAPRICE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1981-1982 CHEVROLET IMPALA

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: DELUXE
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1977 CHEVROLET K20 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SILVERADO
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980 GMC C2500 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1974 CHEVROLET K30 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1982 GMC C2500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 GMC G15/G1500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: RALLY STX
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1974 CHEVROLET MONTE CARLO

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: LANDAU
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1974 CHEVROLET EL CAMINO

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SS
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1976 CHEVROLET MALIBU

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976-1979 CHEVROLET C30 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CHEYENNE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1970-1971 CHEVROLET CAPRICE

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972 CHEVROLET CAMARO

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: SS
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K30 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • Aspiration: N
    • SubModel: SCOTTSDALE
    • Engine Vin: R
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1968 GMC K25/K2500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1973 CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET KINGSWOOD

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 BUICK CENTURY

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SPECIAL
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K2500 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1984-1986 GMC G15/G1500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: RALLY STX
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET KINGSWOOD

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET K20 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SILVERADO
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: CONCOURS
    • Engine Vin: H
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970 CHEVROLET CHEVELLE

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978-1979 OLDSMOBILE OMEGA

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1980 CHEVROLET C10 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CUSTOM DELUXE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977 CHEVROLET MONTE CARLO

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: S
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET CAPRICE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CLASSIC SPORT
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1971 GMC C25/C2500 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1980 CHEVROLET C20 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1980 CHEVROLET C20 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K10 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • Aspiration: N
    • SubModel: SCOTTSDALE
    • Engine Vin: X
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978-1980 CHEVROLET C10 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967 GMC K15/K1500 SUBURBAN

    • CC: 5358
    • Fitment_Note: 50 State Legal
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1975-1978 GMC K25 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET K20 PICKUP

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970-1972 CHEVROLET EL CAMINO

    • CC: 6555
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CUSTOM
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1978 GMC K15 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CONCOURS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1979 CHEVROLET C30 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SCOTTSDALE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1969-1971 CHEVROLET C20 PICKUP

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972-1974 CHEVROLET IMPALA

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: H
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1976 CHEVROLET CAPRICE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CLASSIC SPORT
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978-1979 GMC CABALLERO

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET BROOKWOOD

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976-1978 CHEVROLET MALIBU

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CLASSIC LANDAU
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1978 GMC G35/G3500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: RALLY STX
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K10 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • Aspiration: N
    • SubModel: CHEYENNE
    • Engine Vin: X
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978-1979 CHEVROLET NOVA

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1971-1974 CHEVROLET IMPALA

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1969-1971 CHEVROLET C20 PICKUP

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978-1979 OLDSMOBILE OMEGA

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BROUGHAM LS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC K25 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975 CHEVROLET CORVETTE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: STINGRAY
    • Engine Vin: T
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981-1986 CHEVROLET C20 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970-1971 CHEVROLET BISCAYNE

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976 GMC C1500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1980 GMC G25/G2500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: VANDURA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977-1978 CHEVROLET K5 BLAZER

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CUSTOM DELUXE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1970-1971 CHEVROLET CHEVELLE

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967-1968 GMC K35/K3500 PICKUP

    • CC: 5358
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1975-1976 CHEVROLET CAPRICE

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET K10 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SILVERADO
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1985-1986 GMC C3500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1979 GMC G35/G3500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: VANDURA SPECIAL
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1974 CHEVROLET CAMARO

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • Aspiration: N
    • SubModel: LT
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973 CHEVROLET CAPRICE

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 CHEVROLET K10 SUBURBAN

    • CC: 5358
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1973 CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1980 CHEVROLET C20 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CUSTOM DELUXE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1980 GMC G25/G2500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: RALLY STX
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1981 CHEVROLET K10 SUBURBAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET CHEVELLE

    • CC: 5736
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: CONCOURS ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 GMC K35 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975 GMC G15/G1500 VAN

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 5.7
    • SubModel: RALLY STX
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET BISCAYNE

    • CC: 6556
    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975 CHEVROLET LAGUNA

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1976 CHEVROLET IMPALA

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: CUSTOM
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976 GMC C1500 PICKUP

    • Fitment_Note: When Using Stock Rockers; Must Use .100 in. Longer Than Stock Pushrods~Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke~Do Not Use On Eng. w/Less Than 4in. Bore;Exc w/Cam Less Than .450in. Valve~Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust~50 State Legal
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )
    Items You Need