Edelbrock 7121K - Edelbrock Performer RPM Manifolds & Kits for Ford

Edelbrock #350-7121K

Performer RPM 302 Intake Manifold w/Installation Kit

SB-Ford 260-302ci

4-bbl Square-Bore Carb Flange (non-EGR)

1500-6500 RPM Range

Installation Instructions for Edelbrock 7121K - Edelbrock Performer RPM Manifolds & Kits for Ford

Dyno Chart for Edelbrock 7121K - Edelbrock Performer RPM Manifolds & Kits for Ford

Share |

Complete list of Edelbrock Performer RPM Manifolds & Kits for Ford

Details
Overview
Accessories

Edelbrock 7121K - Edelbrock Performer RPM Manifolds & Kits for Ford Details

Ford 260-302ci Small Block V8

This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, quality intake bolts, intake gaskets, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs.

Designed for street 289-302ci Ford V8s. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. This intake manifold is a stock replacement/street legal part for Shelby Mustangs with 289ci V8 with OEM 4V carb. 1965-66. No provisions for exhaust heated choke. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar Throttle Cable Bracket & Springs p/n 625-SRK-4000.

Installation Notes:

Port exit dimensions: 1.09'' x 1.84''

Manifold height: (A) 3.50'' , (B) 4.75''; Carb pad height = 4.125'' Click here to determine carburetor pad height.

Intake gasket: JEGS p/n 555-210200.

Intake will not fit 255ci engines.

Carburetor Recommendations:

Edelbrock Performer 600cfm Carburetor p/n 350-1405.

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1490 (not for AOD).

Edelbrock Performer 650cfm Carburetor p/n 350-1805.

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1490 (not for AOD).

Edelbrock Performer 800cfm Carburetor p/n 350-1812.

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1490 (not for AOD).

1500-6500 RPM Power!

For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.