Edelbrock 7161PK - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

Edelbrock 7161PK - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

Edelbrock #350-7161PK

Performer RPM 2-O Power Package
Intake Manifold, Carburetor and Camshaft Kit
  • BB-Chevy 396-502ci - Oval Port
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • 1500-6500 RPM Range
  • $684.99 Ships
    Dyno Chart for Edelbrock 7161PK - Edelbrock Performer RPM Manifolds & Kits for Chevrolet Easy Kits
    Share |


    Edelbrock 7161PK - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

    Edelbrock 7161PK - Edelbrock Performer RPM Manifolds & Kits for Chevrolet Details

    Chevy 396-502ci Big Block V8

    Power Package includes matching:
    Performer RPM Intake Manifold p/n 350-7161,
    Edelbrock Performer 750cfm Carburetor p/n 350-1407,
    Performer RPM Hydraulic Flat Tappet Camshaft & Lifters p/n 350-7162.

    Designed for street 396-502ci Chevy V8s with large oval-port cylinder heads (1975 & earlier). This manifold offers the latest technology in dual-plane high rise design and builds outstanding horsepower while maintaining good torque and driveability. No provisions for exhaust heated chokes. Accepts late-model waterneck, air-conditioning, alternator and HEI equipment. Will not fit under stock hood of Corvette, 1965-67 Chevelle, or 1967-81 Camaro.

    Installation Notes:

  • Port exit dimensions: 1.60'' x 1.94''
  • Manifold height: (A) 4.45'' , (B) 6.00'' Click here to determine carburetor pad height.
  • Recommended intake gasket; JEGS p/n 555-210102

    Carburetor Recommendations:
    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit
  • carb acceptable to factory cruise control
  • carb has manual choke only

    Edelbrock Performer 800cfm Carburetor p/n 350-1413
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit
  • carb acceptable to factory cruise control

    Camshaft Specs:
    Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts.

    Performer RPM, Performer RPM Hydraulic Roller and Torker-Plus cams are for street high-performance and racing applications only - not for heavy vehicles. Use with Edelbrock Performer RPM heads (or other aftermarket cylinder heads), adjustable valvetrain components, screw-in studs, high-performance adjustable rocker arms and at least 9.5:1 compression ratio. Headers, high-energy ignition, lower-than-stock rear gearing and a high-performance torque converter are necessary.

    Note: Use only stock ratio rocker arms.

    Duration Advertised:300

    Edelbrock 7161PK - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

    1500-6500 RPM Power!

    For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.

    Accessories
    - Items You May Need
    Always a great choice. Add one to your cart today!
    JEGS Performance Products W80578 - Performance Tool Engine Tools & Accessories
    Only $39.99

    JEGS Performance Products 80580 - JEGS Torque Wrench
    Only $29.99

    JEGS Performance Products 80096 - JEGS Cordless 60 LED Work Lite
    Only $34.99