Blueprint Engines Small Block Chevy 400ci Dress Engine 508HP/473TQ
138-BP4002CTC1
Product Q&A
View Now
Items You Need
Dress Engine
Block:
- New Blueprint block
- 4-bolt main
- 1-piece rear seal
Rotating Assembly:
- Forged Crankshaft
- 5.7'' I-Beam Rods
- Forged Pistons
- Internal Front/External Rear Balancer and Flexplate
Cylinder Heads:
- Blueprint Aluminum Heads
- Hardened retainers and 1.437'' diameter valve springs
- 2.08'' intake valves
- 1.60'' exhaust valves
- Hardened pushrods
Camshaft Specs:
- Hydraulic Roller
- Duration @ .050'' Lift: 236 Intake / 242 Exhaust
- Lift: .555'' Intake / .576'' Exhaust
- Lobe Separation: 110°
Other Features:
- Chrome Valve Covers
- Chrome Timing Cover
- Oil Pan
- Brass Freeze Plugs
- 10.3:1 Compression
Engine Break-In Procedure
Use or break-in oil or conventional (non-synthetic) multi-viscosity oil with zinc additive for the first 500 miles of operation. Avoid hard acceleration for sustained periods. Periodically change the engine speed while driving to help seat the rings. While the engine is running, be sure to check oil pressure and coolant temperature, and check for fluid leaks, such as oil, transmission fluid, fuel, and coolant/antifreeze. Also listen for any unusual sounds. Should you hear an unusual sound, shut the engine off, check for the source, and correct it.
Engines with flat tappet cams only - Start the engine and bring it to 2,000 RPM. Get the engine running smoothly. Then vary the engine speed from 1,800-2,200 RPM in a slow acceleration/deceleration cycle for 30 minutes. This is necessary to provide adequate oil splash and lifter rotation to properly mate each lifter to its lobe.
At 500 Miles change the engine oil and filter using conventional (non-synthetic) oil. After 6,000 miles, synthetic oils can be used in your engine. For flat tappet cam engines, continued use of oil with zinc or a zinc additive for the life of your engine is recommended.
Specifications:
Is the brand of the 850cfm carburetor Holley and the HEI distributor MSD? If not, what brand name are they?
What model number and make is the distributor Does it have a coil? Is a wiring harness for it required. Is there a tachometer wire harness available. Will it fit a 1968 Chevy II Nova? 6 speed manual with a Lake wood scatter shield
Will this engine fit a 1988 Chevy S10 ?
Will my turbo 350 and flywheel bolt to this? It's going in my 71 nova.
Will this engine run on pump gas
Hello, Will this engine as described fit in a 1984 Z28 Camaro?
Will this motor fit in a 1993 GMC Sierra 1500 pickup truck
Is there a possibility of ordering the engine without dress up parts, carb and intake? Perhaps for a lower price? I have all of those things as is
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.