Account Login
Gift Cards
Track Order
Help Center

Edelbrock Performer Series 600 CFM Aluminum Carb with Manual Choke


made in usa

Product Q&A
View Now
Click image to zoom
Performer Series 600 CFM Aluminum Carb with Manual Choke
More than 10 available
Performer Carburetor
  • 600 CFM
  • Manual Choke
  • Non-EGR
  • All Aluminum Body
  • Satin Finish
  • Free Shipping - Ships

    Items You May Also Consider

    1405 is rated 4.8 out of 5 by 38.
    Rated 5 out of 5 by from Great carburetor Great carburetor for my 351w. I only needed to set the idle, no other adjustments.
    Date published: 2022-04-07
    Rated 5 out of 5 by from Made in USA Good right out of the box as advertised. Just had to adjust idle.This is our 3rd Edelbrock and trouble free so far
    Date published: 2021-07-06
    Rated 5 out of 5 by from Works perfectly This carb was a replacement on a Ford 302. The 302 is in an insane motorcycle. The old carb always gave me problems. The amazing thing about the replacement was the setup. Virtuously non existent. The only thing I changed was the idle speed. Didnt have to touch the other settings. Plug and play! There was a noticeable increase in performance too.
    Date published: 2021-04-03
    Rated 5 out of 5 by from great choice I installed my new edelbrock 1405 on my 53 chevy five window . It fired right off and ran great with out doing any adjusting. It really does not get any better than that!
    Date published: 2020-04-04
    Rated 5 out of 5 by from Good carburetor I like using them to replace the old governed holleys on trucks, bolt it on and fire it up. Adjust the idle mixture and speed and away you go, easy as that.
    Date published: 2019-11-25
    Rated 5 out of 5 by from Elbrock carburetor Ordered for co-worker that does not deal with banks or online activities. But He and I were impressed in speed of delivery ( beats most of the "Prime" orders I make. Packaged well with no damage and in the end pleased with carburetor.
    Date published: 2019-09-11
    Rated 5 out of 5 by from Perfect match Super fast shipping and direct bolt on application. Fired right up and did not even turn an adjustment screw.
    Date published: 2019-09-04
    Rated 5 out of 5 by from Wow!! I have a "very stock" 350 Chevy that needed a carb. I've been a Holley guy my whole life and I thought I would try the Edelbrock 1405. What a surprise! The throttle response is quick and crisp. This carb gave that old motor new life. For the street, look no further, the Edelbrock 1405 is the answer!
    Date published: 2019-05-06
    • y_2023, m_2, d_6, h_22
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasreviews, tv_14, tr_24
    • loc_en_US, sid_10001_10001_11348, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Your product description regarding its ability to use E85 and gasahol blends conflicts with the download instructions that says the carb can not. Will this carb run well on the gas blends here in california?

    Asked by: Tagg
    Edelbrock 350-1405 can be used with low ethanol blends found in most gas station pumps typically no more than 15% ethanol. e85 usage or other high alcohol mixtures require use specific carbs
    Answered by: langus
    Date published: 2022-11-18

    How do I set up the manual choke to work when starting my car ?

    Asked by: Sebring
    You will need a choke cable like this - https://www.jegs.com/i/JEGS/555/15830/10002/-1
    Answered by: Rusty B
    Date published: 2020-10-05

    Will this work on a 67’ ford truck?  

    Asked by: Mae21
    It will depend on the truck model, but this will fit most 4 bbl manifolds.
    Answered by: Rusty B
    Date published: 2018-10-08

    will this carb fit a 1979 dodge aspen v8 318

    Asked by: aspen55
    Depends, if the engine came with a 2 barrel carburetor the you will need an aftermarket 4 barrel intake. if it came with the carter 4 barrel it should work as long as it is a square bore intake but you may need to make changes to get the throttle cable, fuel line, and kick down for the transmission to work on this unit.
    Answered by: sMango
    Date published: 2018-04-07

    Will this carb be good to run on my Holly intake on a 5.3

    Asked by: Ryanrivet
    Yes, this is a good size for the 5.3 engine.
    Answered by: Rusty B
    Date published: 2020-07-16

    Is the factory mechanical fuel pump acceptable on a 1980 Corvette to run the 1405 carb? What else will I need if not?

    Asked by: Big daddy Kane
    The factory mechanical pump will work well with this carb.
    Answered by: Jon Jegs Tech
    Date published: 2018-03-22

    Which is the full vacuum and which is the timed vac?

    Asked by: Churt1
    Please reffer to these installation instructions - http://www.jegs.com/InstallationInstructions/300/350/350-1403.pdf
    Answered by: Rusty B
    Date published: 2018-03-01

    will this carb fit a 1975 oldsmobile 350 motor.

    Asked by: bass350
    The intake would have to be changed for use on the Olds engine.
    Answered by: Jon Jegs Tech
    Date published: 2018-01-19
    • y_2023, m_2, d_6, h_22CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_10
    • loc_en_US, sid_10001_10001_11348, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Easy Kits

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.