- Jegs
- Engines & Components
- Cylinder Heads
- Edelbrock Small Block Chevy Performer RPM Aluminum Cylinder Heads
Edelbrock Performer RPM Cylinder Head for Small Block Chevy
350-60899






Items You Need
Ratings |
---|
Price |
Brand |
Performer RPM Small Block Aluminum Straight Plug Cylinder Heads
Installation Notes: When using stock rockers on SB-Chevy Performer & Performer RPM heads, .100'' longer than stock pushrods are required. Due to valve-to-cylinder bore interference, SB-Chevy heads may not be used on engines with less than 4'' bore (262, 265, 283, 305, 307 c.i.d.) except with camshafts having less than .450'' valve lift.
Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.
Combustion Chamber Volume: | 64cc |
Intake Runner Volume: | 195cc |
Exhaust Runner Volume: | 65cc |
Intake Valve Diameter: | 2.02'' |
Exhaust Valve Diameter: | 1.60'' |
Valve Stem Diameter: | 11/32'' |
Valve Guides: | Manganese Bronze |
Deck Thickness: | 9/16'' |
Valve Spring Diameter: | 1.46'' |
Valve Spring Maximum Lift: | 0.575'' |
Rocker Stud: | 3/8'' |
Guideplate: | Hardened Steel |
Pushrod Diameter: | 5/16'' |
Valve Angle: | 23° |
Exhaust Port Location: | Stock |
Spark Plug Fitment: | 14mm x 3/4'' Reach, Gasket Seat |
Valve Lift | Intake | Exhaust |
.100'' | 63 | 51 |
.200'' | 124 | 94 |
.300'' | 181 | 128 |
.400'' | 227 | 146 |
.500'' | 253 | 157 |
.600'' | 253 | 163 |
.700'' | N/A | N/A |
Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28'' H2O |
Specifications:
Edelbrock Performer RPM Small Block Chevrolet Cylinder Heads
The Performer RPM Small Block aluminum cylinder heads are designed for Small Block Chevy 265, 283, 302, 305, 307 327, 350 and 400ci engines up to 2003. Performer heads are designed with compact combustion chambers and high-flow ports to increase throttle response and overall performance throughout the RPM power band. These cylinder heads are designed in-house in Torrance California and are cast from A356 aluminum heat treated to T-6 Aluminum specifications.
All performer heads feature a 9/16-inch deck, extra thick port walls with high flowing ports, ductile iron seats, stainless steel valves, threaded inserts for rocker studs and exhaust bolts as well as manganese bronze valve guides. Available with either stock straight or angled spark plug configuration, heads are available bare or dressed and pre-assembled. All heads are all sold individually. Reference individual part number listings for a comprehensive list of specifications.
Edelbrock Performer RPM Series Cylinder Heads are legal on pre-pollution controlled vehicles only.
What headers will fit putting the heads on a 84 k10
Best headers for this application
What valve covers are recommended for these heads, will stock height work or will I need tall valve covers
Is this just 1 head or the set?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.