Ford Performance Coyote 5.0L Gen III Aluminator NA Crate Engine
397-M-6007A50NAB
Product Q&A
View Now
Crate Engines
Features:
- Includes Ford Performance colder, heat range zero (0) spark plugs (M-12405-M50A), (1) Ford Performance oil filter (M-6731-FL820), and billet steel gerotor oil pump gears (M-6600-M50A)
- Utilizes a production 2020 Mustang GT aluminum block
- The connecting rods and pistons are designed specifically for high-performance applications
- Mahle hard-anodized forged pistons with Grafal low-friction coating
- Manley H-beam connecting rods with ARP 2000 bolts
- Forged steel crankshaft
- 10-quart capacity oil pan
- Tuned composite Mustang GT intake manifold with production drive-by-wire 80 mm throttle body variable runner control
- Four-valve-per-cylinder aluminum heads with roller-finger followers to reduce friction
- Mustang GT production camshafts
- The engine mount bosses and bell housing mount pattern are common to the 4.6L modular engine
Notes:
- Vehicle harness and PCM NOT included - Recommended to use Ford Performance wiring, PCM, and installation kit 397-M-6017-M50B, designed for manual transmission
- Alternator NOT included - - Recommended Ford Performance 397-M8600M50BALT or M-8600-M50ALTA
- Exhaust manifolds NOT included
Engine Break-In Procedure
Fill the engine with the proper viscosity and amount of engine oil. For the first 500 miles of operation, do not drive for long periods at any single speed -always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. Check the engine oil and coolant levels daily. At 500 miles, change the engine oil and filter. Check fuel and ignition settings; adjust valves (where applicable).
Specifications:
Will it fit in a 2014 F-150 4 WD
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.