
Tremec 600 Extra HD 5-Speed 600 ft/lbs Torque Capacity Gear Ratios:
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Gear Ratios:
- Close ratio (1st through 4th)
- Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.68
- Features improved shift forks, one-piece counter-shaft, gears made of 4615 steel which increases the torque capacity over that of the M-7003-R58 model
- Input shaft is 26 spline; output shaft is 31 spline
- Requires bellhousing M-6392-R58 to install in a 1979-1995 Mustang
- For 1979-1993 Mustang applications, use M-5059-A crossmember (79-81 will require modification)
- For 1994-1995 Mustang applications, modify vehicle crossmember, lengthen driveshaft .625" and use clutch fork E6ZZ-7515-A
- 31 spline driveshaft yoke required, M-4841-A recommended
- Requires unique clutch disc M-7550-T302 (10.5") designed for use with 26 spline input
- Can be used in 4.6L applications with bellhousing M-6392-M46 and Clutch Kit M-7560-T46 (11")
- Transmission uses Synchromesh fluid
These are the same Tremec HD 5-speed manual transmissions used in the 1995 Mustang Cobra "R" models with the 351 5.8L engines.
Built to handle the torque of today's modified engines, these high-performance transmissions are available in a 5-speed or 6-speed version. Sometimes stock just isn't enough to hold the torque or your driving style. With some additional parts and minor modifications, you can double a transmission's torque capacity without resorting to an unfriendly street solution. Don't get worked over by your transmission, get the transmission Ford would have used if they built your car.
Features:
- Street-Friendly Manners
- Swaps with Off-the-Shelf Parts
- Doubles Torque Capacity of Factory Transmission










