PROBIKE
FuelTech 3026100303 PROBIKE "A" Harness:
- Complete harness for most 4-cylinder sportbike applications w/some modifications, though designed around a stock Hayabusa w/stock connectors and sensors
- Required harness for FuelTech ECU and engine monitoring system FT450
- Required harness along with PROBIKE Harness "B" 3026100304 when using FT550, or FT550LITE ECU's and engine monitoring systems (both harnesses required)
- Connectors for 4 injectors w/Hayabusa Sumitomo injectors and supports up to 8 w/PROBIKE "B" 3026100304 harness and using FT550 or FT550LITE
- Setup for 4 Coils w/stock Hayabusa 2-way coil connectors
- Pre-wired engine sensor wires such as TPS, Hall and VR crank sensor, Hall and VR cam sync, speed sensor, oil pressure, and fuel pressure
- Connector in place for a Nano WB-O2 Oxygen Sensor Conditioner and a wideband O2 sensor such as 540-3737 (or equivalent). It can also be set up for use with the Alcohol O2 Conditioner by using the Alcohol O2 Harness and Bosch to NTK Adapter Harness (all sold separately)
- (4) Additional outputs to control the wastegate, nitrous, fuel pump, and more (will require connector kits for the components outputs are controlling)
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.