
EDELBROCKPART NUMBER: 350-2908
Victor Jr. LS1 Intake Manifold and Timing Kit
$1,09995
Chevy LS Victor Jr.
- GM Gen III LS
- Cathedral Port
- 4-bbl Square-bore Carburetor Flange
- Includes Timing Control Module
- 3500-7500 RPM Range
This high-rise single plane intake is capable of supporting up to 600 hp. The Victor Jr. LS1 accepts a square bore carburetor and includes an electronic timing module that picks up MAP, crank position, and cam position in order to drive the stock LS1 Coil-on-Plug ignition system. The module offers a choice of several built-in timing curves, each tailored for engine displacement, cam profiles, and fuel grades. Most applications will require hood modification.Installation Notes - Port Exit Dimensions: .98" Wide x 2.74" Tall
- Uses LS1/LS6-style individual port O-ring seals
- Recommended intake gasket; Jegs 555-210800
- Manifold Height: (A) 4.95' , (B) 4.95'; Carb pad height = 4.95'
- View Manifold 'A/B' Measurement Guide.
- Includes intake manifold, wiring harness, throttle cable/transmission kickdown cable bracket, and timing control module
- Throttle/trans bracket compatible with TH350, 200R-4 & TH700R-4 transmissions
- Timing control module and wiring harness works with LS1 24x reluctor wheel(crank trigger) applications only
- LS1(24x) applications can be identified by the rear mounted cam position sensor that is black in color
- LS2 applications with 58x reluctor wheel(crank trigger) use MSD ignition controller 121-6012
- LS2(58x)applications can be identified by the timing cover mounted cam position sensor that is grey in color
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Part TypeIntake Manifold
BrandEDELBROCK
Package Height8.1
Package Width14.8
Package Length23.8
Weight21.5 PG
Part CategoryPerformance Parts
Engine Block StyleStock/OEM standard Deck
UsageRacing
Number Of CarbsOne
Intake MaterialAluminum
PositionN/A
Intake StyleSingle plane
EmissionWithout EGR
QuantitySold individually
Cylinder Head TypeStandard
Intake FinishNatural
Carburetor QuantityOne
Engine Make/SizeGM LS
Intake Section IncludedComplete
Basic Operating Rpm Range3,500-7,500
EgrWithout EGR
Rpm Range3500-7500
Intake Manifold Height4.95 in (125.73 mm)
Vendor Part Number2908
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations
![Carburetor Stud Kit [1 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15840.jpg)
![Carburetor Stud Kit [2 in. long]](https://www.jegs.com/images/mini_200/500/555/555-15841.jpg)
![Carburetor Stud Kit [2 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15842.jpg)
![Carburetor Stud Kit [2 3/4 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15845.jpg)
![Carburetor Stud Kit [3 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15846.jpg)
![Carburetor Stud Kit [3 3/4 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15847.jpg)




