14-Circuit Universal Wiring Harness
JEGS 10411 14-Circuit Universal Wiring Harness is designed as a universal cut-to-fit complete wiring harness system that is compatible with virtually every make & model vehicle manufactured before 1979. Our harness uses the highest quality GXL coated copper stranded wire for reliability. Each kit comes with pre-labeled wires with its corresponding connection to make installation a breeze. Whether you're doing a ground-up restoration or replacing an existing wiring harness this kit will support your entire electrical system.
- Stop / Radio Constant
- Horn Headlights
- Dome / Hazard
- Fuel Pump
- Radio / Ignition
- Gauges Coil
- Electric Fan
- Wiper / Back-Up
- A/C + Heat
- Turn Signal
Wire Harness Includes:
- (2) Head Light Connectors
- (6) Head Light Terminals
- (1) Firewall Grommet
- (11) Column Plug Terminals
- (1) Early Model GM Column Plug
- (8) Butt Splices
- (10) 1/4 in. Terminals
- (1) Dimmer Switch Connector
- (1) Alternator Plug
- (1) Ignition Switch Connector
- (4) Ring Terminals
- (1) Fusible Link
- (1) 6 in. Jumper Wire
- (1) Fuse Block with horn relay, turn signal relay, hazard flasher and standard ATO fuses installed
- (1) Instruction Manual
Note: Rear wiring is 25ft long.
Quality Wiring Harnesses at Affordable Prices
JEGS Universal Wiring Harnesses fit almost any car or truck with a front-mounted engine and fuse block located under the dash near the steering column. These wiring harnesses are available in 14-Circuit and 20-Circuit models and require limited space under the dash for mounting. Our kits use premium quality high-temperature GXL coated copper stranded wire for reliability. GXL wire has a temperature rating of -59 degree F (-51 degree C) to 257 degree F (125 degree C) and is resistant to moisture, grease, oil, gasoline, most acids and solvents. Each wire is color-coded and labeled for easy identification during installation and to simplify even further all wires are attached to the fuse block. Every attached terminal is machine crimped and hand-soldered making the best connections possible. Each fuse block includes a horn relay, turn signal relay, hazard flasher and standard ATO fuses. Wiring harnesses will work with a dash mounted or steering column mounted ignition switch and also have optional connectors for common GM-style accessories, such as dimmer switch, hazards, and alternator. For vehicles that don't use GM accessories, simply omit the extra connectors during installation. The installation instructions show how to make all connections for GM, Ford, and Chrysler vehicles.
could this work in 1977 fiat spider?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.