$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Cool Gap Intake Manifold for 1957-1991 Small Block Chrysler/Mopar 318, 340 & 360, Dual Plane [Satin]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-513072

Cool Gap Intake Manifold for 1957-1991 Small Block Chrysler/Mopar 318, 340 & 360, Dual Plane [Satin]

$27299$300.99You Save$28.00
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Intake Manifold Gasket Set for Small Block Chrysler Stock 4-BBL/Magnum

MAHLE PERFORMANCE GASKETS

Intake Manifold Gasket Set for Small Block Chrysler Stock 4-BBL/Magnum

Part Number : 696-MS20085
$5299
Intake Manifold Gaskets Chrysler 318 with 4-bbl Cylinder Heads & 340-360

JEGS

Intake Manifold Gaskets Chrysler 318 with 4-bbl Cylinder Heads & 340-360

Part Number : 555-210400
$1780$20.99
You Save$3.19
High-Flow 180 degree Thermostat for 1978-Earlier Mopar, Chrysler, Dodge

JEGS

High-Flow 180 degree Thermostat for 1978-Earlier Mopar, Chrysler, Dodge

Part Number : 555-53231
$769$8.99
You Save$1.30
12-Point Intake Manifold Bolts for Chevy, Mopar and AMC [Zinc Dichromate Gold]

JEGS

12-Point Intake Manifold Bolts for Chevy, Mopar and AMC [Zinc Dichromate Gold]

Part Number : 555-83250
$1999$21.99
You Save$2.00

Small Block Mopar
Cool Gap Intake Manifold
  • 1957-1991 Small Block Chrysler/Mopar 318, 340 & 360
  • Dual Plane
  • 4-BBL Square Bore 4150/4160 Mounting Flange
  • Non-EGR
  • RPM Range: 1500-6500
  • Cast Aluminum
  • Satin Finish

    JEGS 513072 Small Block Chrysler/Mopar Intake Manifold Features:

    • Features angled manifold bolt holes for 318/340heads and vertical bolt holes for 360 heads
    • Includes knurled plugs for angled bolt holes only
    • Dual Plane design for optimum fuel distribution
    • Accepts 4150/4160 4-BBL square bore carburetors
    • Cool Gap design keeps hot engine oil away from intake runners resulting in a cooler, denser charge for more horsepower, torque, and efficiency
    • (8) Intake runner bosses cast in for nitrous or fuel injector ports
    • Port exit dimensions: 1.078 in. W x 2.155 in. H
    • Estimated runner length - Shortest: 5.00 in.
    • Estimated runner length - Longest: 6.250 in.
    • Manifold height: Front (A) 4.875 in., Rear (B) 5.750 in. (A + B divided by 2 = 5.3125 in. pad height) Click here to determine carburetor pad height
    • (1) Left/Driver side front 3/8 in. NPT water outlet port
    • (1) Right/Passenger side front 1/4 in. NPT water outlet port
    • (1) Right/Passenger side front 1/8 in. NPT water outlet port
    • (1) Right/Passenger side rear 3/8 NPT vacuum port
    • 1979 and later rotary air conditioning compressor willnot clear water neck.
    • Will not accept Thermo-Quad
    • Accepts early-style waterneck only
    • No provision for exhaust-heated chokes
    • No exhaust crossover

    Additional Recommended Items (Sold Separately):

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

      • Cooler Intake Temperature Makes Horsepower

        JEGS Cool Gap dual-plane intake manifold is more efficient and creates more horsepower than standard dual-plane models. This manifold's unique air space design under the plenum and runners allow airflow to pull off excess heat, decreasing the intake temperature and providing better fuel atomization for improved performance. The 4150/4160 carb flange accepts most non-EGR 4-bbl square bore carburetors; this cast aluminum manifold is available in satin and polished finishes.

      Part TypeIntake Manifold
      Product LineJEGS Cool Gap Performance Intake Manifolds
      BrandJEGS
      Package Height7.8
      Package Width13.1
      Package Length22.5
      Weight19.35 PG
      Part CategoryPerformance Parts
      Engine Block Deck HeightStandard deck
      Engine Block StyleStock/OEM standard deck
      UsageStreet/Hi-Performance
      Intake MaterialCast Aluminum
      Supplemental Bosses Cast-InYes
      Intake StyleDual plane
      Port StyleRectangular
      Cylinder Head TypeStock configuration
      Intake FinishSatin
      Carburetor QuantityOne
      Engine Make/SizeMopar Small Block
      Intake Section IncludedComplete
      Basic Operating Rpm Range1,500-6,500
      EgrWithout EGR
      Supplemental Bosses MachinedNo
      Carburetor Mounting4-barrel square bore
      Rpm Range1500-6500
      Part FitmentSemi Universal
      Port Width (In.)1.078 in.
      Supplemental Boss Quantity8
      Port Height (In.)2.155 in.
      Intake Manifold Height5.313 in.
      Package Qty1
      Package TypeEA
      No Questions
      No Reviews
      Some parts are not legal for use in California or other states with similar laws / regulations
      p65 warning