JEGS Street Performance Clutch & Flywheel Kit for Select 1955-1985 Small Block Chevy & Big Block Chevy [Internally Balanced]
Items You Need
JEGS 555-60088K Street Performance Clutch & Flywheel Kit
This clutch & flywheel kit is designed for vehicles with mild engine modifications up to 400 hp and street tires, making it an ideal entry-level clutch for street machines when converting to 5 or 6-speed transmissions with 26-spline input shafts.
JEGS 555-60088K Street Performance Clutch & Flywheel Kit Notes:
- Will not work with Chevrolet Models that came with a 10.500 in. diameter clutch and small bellhousing. Large GM bellhousing is required to accept an 11 in. clutch.
- Will not fit Chevrolet 400 or 454 engines as they are externally balanced and require their own specific flywheels.
JEGS 555-60088K Street Performance Clutch & Flywheel Kit Includes:
- (1) JEGS Street Performance Clutch Kit GM V8 [11 in. Diameter, 1 1/8 in. x 26 Spline] 555-60088
- (1) JEGS Flywheel for 1955-1985 Small Block Chevy & 1961-1972 Big Block Chevy, 168-Tooth [Internally Balanced] 555-601205
JEGS 555-60088K Street Performance Clutch & Flywheel Kit Fits:
- Small Block Chevrolet (Internally Balanced Engines)
- 262 (1975-1976)
- 265 (1955-1957)
- 267 (1976-1982)
- 283 (1957-1967)
- 302 (1967-1969)
- 305 (1976-1985)
- 307 (1968-1973)
- 327 (1962-1969)
- 350 (1967-1985)
- Big Block Chevrolet (Internally Balanced Engines)
- 396 (1965-1970)
- 402 (1970-1972)
- 409 (1961-1965)
- 427 (1963-1969)
I have a super t-10 from a 1975 corvette. It's a 26-spline, but the original flywheel was 14 inches in diameter. Will this work?
I have a 1966 chevy suburban factory 4 wheel drive and dropping in a 350 chevy, will this kit work with the manual 4 speed trans that the truck came with? I believe its a 10 spline with an 11 inch clutch that came factory.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.