Coil-Over Shock Travel Indicator Kit

Name: Coil-Over Shock Travel Indicator Kit
Brand: JEGS
SKU: 555-64939
Price: 56.99 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Shock Travel Indicator

Fits 2.500 in. I.D. Springs

Clamps to Shock Body

Includes:

1/8 in. Thick 6061-T6 Aluminum Mounting Brackets
1/4 in. Diameter x 17 3/4 in. Long Aluminum Rod with O-rings
Clamp

JEGS 64939 Coil-Over Shock Travel Indicator Kit allows you to check shocks travel up (rebound) and down (compression) on your vehicle suspension. This kit will attach to most coil-over shock absorbers with a 2.500 in. I.D. spring. This tool is perfect for establishing a starting point when adjusting your race car suspension and is very inexpensive compared to an electronic telemetry system.

Tools to Get the Full Potential From Your Coil-Over Shocks

JEGS offers several tools to help with the installation and setup of your coil-over shocks.

JEGS Coil-Over Shock Set-Up Tool can assist you in selecting the right coil-over shock and ride height for your ride without the purchase of a coil-over. Can also be used when you are building your hot rod or trailering it for long a distance. There will be no damage/wear and tear to your coil-over which will extend their life.

JEGS Steel Spanner Wrench Set is designed to work with many coil-over shocks, such as JEGS, Competition Engineering, QA1, Strange, and Koni. These zinc dichromate-plated wrenches have a hole in the handle to insert a 3/8 inch ratchet or breaker bar to remove/tighten stubborn nuts! Small ID wrench & large ID wrench is available with or without thrust bearings.

JEGS Billet Aluminum Spanner Wrenches unlike other universal spanner wrenches that only attach to the coil-over nut in one spot have removable teeth to grip the nut in up to three places on JEGS, QA1, Strange, Competition Engineering, Koni, and other brand shocks. Features a place in the handle to insert a 3/8 inch ratchet or breaker bar to remove or tighten the stubborn nuts! Includes two wrenches, one with a large I.D. and one with a small I.D., to ensure proper grip. Made from billet aluminum with a hard anodized finish for the ultimate durability. Also includes an extra set of teeth for each wrench!

JEGS Shock Travel Indicator Tool will help you determine the shock travel compression and rebound so you can make the adjustments needed to get the full potential from your coil-over shocks. Installs in Minutes.

Part TypeCoilover Shock Tool

Product LineJEGS Coil-Over Shock Tools

BrandJEGS

Package Height1.1

Package Width3.5

Package Length18.0

Weight0.3 PG

Part CategoryAccessories

Part FitmentUniversal

Package Qty1

Package TypeEA