This JEGS 78607 right rear Cab Corner is a direct-fit replacement for use in all cab models of 1967-1972 Chevrolet and GMC C/K Series Trucks.
Note: Cutting and Welding is required.
Special Note: Before packaging by our team of professionals, each panel sold by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damage and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.
Precision Stamped Cab Corners for a Perfect Fit
Truck Cab Corners are usually one of the first body panels to rust out or get damaged. JEGS reproduction stamped-steel cab corners are made to duplicate the original factory look and fitment, and come prepped with an electrodeposit primer (EDP) protection for long-term durability. You can buy with the confidence that JEGS restoration panels will get your project to completion. Cutting and welding is required.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.