Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
![Cab Corner Panel for 1967-1972 Ford F100, F250, F350 Trucks [Right/Passenger Side]](https://www.jegs.com/images/mini_750/500/555/555-80295.jpg)
Vehicle Info NeededCab Corner Panel for 1967-1972 Ford F100, F250, F350 Trucks [Right/Passenger Side]
Ships Today
Lowest Price GuaranteeItems You Need
![MIG/Arc Welder, 180C [220V AC]](https://www.jegs.com/images/mini_200/500/555/555-81541.jpg)
![MIG 100 Gasless Wire Welder [110V AC]](https://www.jegs.com/images/mini_200/500/555/555-81540.jpg)
![Welding Cart [36 1/2 in. L x 17 3/8 in. W x 30 1/2 in. H]](https://www.jegs.com/images/mini_200/500/555/555-81639.jpg)
![BDWG-GAMECHANGERS-HEAVY-D-XL GameChangers Heavy-D's Welding Glove [X-Large]](https://www.jegs.com/images/mini_200/100/152/152-bdwg-gc-h-xl.jpg)
![Seam Sealer White [1-Quart Can]](https://www.jegs.com/images/mini_200/500/555/555-72334.jpg)
![Auto Body Repair Kit [7-Piece Set]](https://www.jegs.com/images/mini_200/500/555/555-8007.jpg)
![Air Compressor [3 HP, 110 Volt, Single Phase, 60-Gallon Tank]](https://www.jegs.com/images/mini_200/500/555/555-81850.jpg)
![Air Accessory Set [22-piece]](https://www.jegs.com/images/mini_200/500/555/555-m523.jpg)
![Air Oil & Water Separator [4 1/2 in. Height x 1 3/4 in. Diameter]](https://www.jegs.com/images/mini_200/500/555/555-52205.jpg)
![Industrial Strength Cleaner and Degreaser [1 Gallon]](https://www.jegs.com/images/mini_200/500/555/555-72302.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)
![Rolling Scissor Work Stand [500 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81442.jpg)
- Cab Corner Panel
- 1967-1972 Ford F100, F250, F350 Trucks
- Right/Passenger Side
- 20-Gauge Stamped Steel
- With Factory Contours
- Black EDP (Electro-Deposit Primer) Coated
- Sold Individually
JEGS 555-80295 Cab Corner Panel
This JEGS 80295 right rear Cab Corner is a direct-fit replacement for use in 1967-1972 Ford F100, F250, and F350 Trucks with standard cab. These corners are made from heavy-gauge stamped steel to the OE specifications for a factory fit and function. The EDP (Electro-Deposit Primer) finish helps to prevent rust and corrosion.
Note: Cutting and Welding is required.
Special Note: Before packaging by our team of professionals, each panel sold by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damage and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.
ITEM YOU MAY ALSO CONSIDER
