Account Login
Gift Cards
Track Order
Help Center

JEGS Toe Plates Aluminum


made in usa

Product Q&A
View Now
Click image to zoom
Toe Plates Aluminum
SAVE $12.00
More than 10 available
Toe Plates
  • Aluminum
  • 24" x 9" x 0.120"
  • (2) Toe Plates
  • (2) 16 ft. Tape Measures
  • Ships

    Items You May Also Consider

    81680 - JEGS Toe Plates is rated 4.3 out of 5 by 12.
    Rated 5 out of 5 by from Works well! I have a c6 corvette road race car and got tired of taking it to the shop to get aligned. I have my camber and caster set so all I needed to adjust was toe and these allow me to do that. It’s tricky with such a low car, but I make it work. And it definitely helps having two people. Overall great buy for the price and they’re easy to use
    Date published: 2020-10-13
    Rated 5 out of 5 by from Great kit! I bought this kit just a few weeks ago, and have used it four times. Easy to use and understand.
    Date published: 2018-03-16
    Rated 5 out of 5 by from Simple, well-made, and easy to use I tried a home-made solution to adjust the alignment on my son's MG. It was frustrating, I wasted a lot of time, and worst of all, I couldn't get reliable/repeatable results. I bought the Jegs toe plates and had the job done in about 15 minutes, including rechecking my work. These are simple plates, very solid and easy to use. Use them once and they've paid for themselves.
    Date published: 2016-07-22
    Rated 4 out of 5 by from Worked good. My '69 Ford is a twin I-beam truck, so the only thing to adjust is toe. I ordered these plates and they worked fine for me. They would have worked a little better if they were three or four inches longer, but they still worked ok.
    Date published: 2019-02-13
    Rated 4 out of 5 by from Minor flaw, great value The slot in the toe plate wasn't wide enough to fit the curved metal piece at the end of the tape measure. Grindy grindy here and there, smashed the end of the tapes in a vise, and 10 minutes later these worked great.
    Date published: 2017-07-11
    Rated 3 out of 5 by from JEGS Toe Plates drilled holes ,and added bungie straps to each plate, to hold plate to wheel, so they actually stay square to the wheel for accurate measurements. other than that they do what they were made to do
    Date published: 2019-11-23
    Rated 1 out of 5 by from Tape slots too narrow to fit tapes, not flat These were given to me as a gift. Looked fine when I first took them out of the box, but when I tried to actually use them to do a toe adjustment, I noticed 2 big problems. 1) The slots to insert the tape measures were so narrow the tape end (hook) would not fit. This was with the tape measures that came with the kit and both tape measures I own. 2) The larger problem - both plates were curved/bent slightly such that there was about 3/32" from one side to the other. The box was in very good shape and there was no apparent shipping damage - I suspect the machine that adds the bevels to the top/bottom created this curve. Hard to set your toe to within 1/16" when the toe plates are some part of 3/16" out depending on how you place them. 2 images attached - one is of the tapes provided not fitting in the slots, and the other is the 2 toe plates put together front to front. If they were straight there would be no gap in the center of the plates. I ended up purchasing a different brand - they have a 90deg bend at the top and a large 45 deg bend at the bottom. Tape measure hooks fit and they are completely flat.
    Date published: 2018-02-15
    • y_2023, m_12, d_5, h_8
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
    • cp_1, bvpage1
    • co_hasreviews, tv_5, tr_7
    • loc_en_US, sid_10001_10001_1439814, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Easy Kits

    Related Products

    Revised water passage improves coolant flow from the cylinder headsUses -24AN fitting for water outlet (can use reducer for -20AN fitting). Chevy SB2.2.
    Use with mechanical cams, threaded stud, adjustable (non-rail) rocker arms and hardened push rods.May require modification for use with roller rocker arms.Ford Racing valve pushrod guideplates are designed to support your pushrods in order to keep your rocker arms centered ...
    Will not fit Gen IV blocks (LS3, LS7, or blocks with Active Fuel Management [AFM, DOD])Natural Aluminum FinishFinish may contain minor tool marks/scratches. LS Billet Valley Pan Cover Plates.

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.