Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
![Sail Panel for 1968-1972 Chevrolet Chevy II, Nova, 1971-1972 Pontiac Ventura [Left/Driver Side]](https://www.jegs.com/images/mini_750/500/555/555-91878.jpg)
Vehicle Info NeededSail Panel for 1968-1972 Chevrolet Chevy II, Nova, 1971-1972 Pontiac Ventura [Left/Driver Side]
Ships Today
Lowest Price GuaranteeItems You Need
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)
![Sail Panel for 1968-1972 Chevrolet Chevy II, Nova, 1971-1972 Pontiac Ventura [Right/Passenger Side]](https://www.jegs.com/images/mini_200/500/555/555-91879.jpg)
JEGS
Part Number : 555-91879
![MIG 100 Gasless Wire Welder [110V AC]](https://www.jegs.com/images/mini_200/500/555/555-81540.jpg)
![Welding Cart [30 in. L x 12.5 in. W x 16 in. H]](https://www.jegs.com/images/mini_200/500/555/555-81543.jpg)
![Air Accessory Set [22-piece]](https://www.jegs.com/images/mini_200/500/555/555-m523.jpg)
![Air Oil & Water Separator [4 1/2 in. Height x 1 3/4 in. Diameter]](https://www.jegs.com/images/mini_200/500/555/555-52205.jpg)
![Seam Sealer White [1-Quart Can]](https://www.jegs.com/images/mini_200/500/555/555-72334.jpg)
![Polyester Paint Brush Set [5-piece]](https://www.jegs.com/images/mini_200/500/555/555-20195.jpg)
![Auto Body Repair Kit [7-Piece Set]](https://www.jegs.com/images/mini_200/500/555/555-8007.jpg)
![Dead Blow Hammer Set [3-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81754.jpg)
![Rolling Scissor Work Stand [500 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81442.jpg)
![Plier Set [5-Piece]](https://www.jegs.com/images/mini_200/500/555/555-w1717.jpg)
![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
JEGS 555-91878 Sail Panel Features:
- Reproduction of a factory-style sail panel made to the original fit for easy installation
- Includes all the correct factory contours for an authentic look
Special Note: Before packaging by our team of professionals, each panel sold by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damage and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.
OE-Replacement Rear Quarter Panels for Your GM Car
JEGS offers a range of complete GM rear replacement quarter panel choices to restore your car to like-new condition. Our heavy-gauge stamped steel panels fit perfectly and are long-lasting, matching OE requirements.
