
12127099 Independent Rear Suspension for 1979-1993 Ford Fox Body Mustang
Items You Need
Independent rear suspensions (IRS) are superior in almost every way over a straight rear axle. This bolt-on Ridetech 12127099 IRS Conversion is an easy bolt-on system for the 1979-1993 Fox Body Mustang. It provides maximum performance, high strength, and OEM reliability utilizing SN95/S550 Mustang driveline & brake components for an unstoppable combination.
Ridetech 12127099 Independent Rear Suspension Features:
- 100% Bolt-in design requires minimal modifications
- Lowered stance of approximately 2 in. reduces the center of gravity without adversely affecting suspension geometry
- Reduced unsprung weight improves ride quality
- Low 5 in. roll center and 1 degree of camber gain with zero bump steer provide improved cornering and suspension geometry over the original suspension design
- 50% anti-squat provides excellent traction
- Delrin control arm bushings eliminate wheel hop with no noise and no bushing lube required unlike urethane
- Retains factory track width
- Compatible with mini-tubs (cradle attaches to the inside of the frame rails)
- Modular design
- Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking & reduced maintenance
- Durable powder coat finish corrosion resistance
Ridetech 12127099 Independent Rear Suspension Notes:
- Uses S550 Mustang differential such as M-400188355B or equivalent (sold separately), used takeout units are also available
- Requires Ridetech 4 in. shorter than stock axles 12129599 (sold separately) withstanding up to 500 flywheel horsepower
- Ridetech 12129510 Caliper Brackets (sold separately) allows direct bolt-on of both stock or aftermarket brakes from a 1999-2004 SN95 Mustang Cobra
- Ridetech 12129511 Caliper Brackets (sold separately) allows direct bolt-on of both stock or aftermarket brakes from an S550 Mustang
- Compatible with 1999-2004 Mustang Cobra cat-back exhaust systems
- Requires driveshaft to be shortened
- Requires pinion flange to U-joint adapter such as Sonnax T35-ALFY-09 or equivalent (sold separately)
- Works with Ridetech 12126410 or 12126411 Coilovers or 21130101 Shockwaves (each sold separately)
- Optional Ridetech 12129102 adjustable rate rear sway bar is available for additional fine-tuning (sold separately)
Get Your Mustang Track Ready
Ridetech Ford Fox Body Mustang Suspension & Components lets you choose from complete suspension systems, coil-over shocks, air ride, tubular A-arms, coil-overs, spindles, and even sway bars. Whether for the street or the track, we have the right parts to optimize the suspension of the timeless Fox Body Mustang.


![Deep Well Impact Socket Set, 1/2 in. Drive [SAE 11-Piece]](https://www.jegs.com/images/mini_200/500/555/555-m590db.jpg)
![Mechanic Chair & Step Stool on Wheels [300 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81156.jpg)







![6-Bolt Adapter Flange Yoke Kit For 1350-Series U-Joints [Aluminum]](https://www.jegs.com/images/mini_200/800/852/852-t35-alfy-09.jpg)
![M-4001-88355B Mustang Super 8.8 in. IRS Loaded Differential Housing [3.55 Ratio]](https://www.jegs.com/images/mini_200/300/397/397-m-400188355b.jpg)
![Caster/Camber Gauge [Camber Angles: +/- 8 Deg.]](https://www.jegs.com/images/mini_200/500/555/555-81679.jpg)


![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)
![Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81565.jpg)


