Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededACDELCOPART NUMBER: 065-13588977
Front Driver Si (SLP-1)
$4799
Ships on 09/10/2026
Lowest Price GuaranteePart TypeDisc Brake Caliper
BrandACDELCO
Weight8.26
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Programming RequiredNo
Pads IncludedNo
Inlet Thread Diameter (In)0.315
Bleeder Screw Quantity1
Pad Wear Sensor IncludedNo
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Caliper TypeFloating
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Integrated Parking BrakeNo
Brake Caliper ManufacturerMando
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Piston 1 Diameter (Mm)60mm
Disc Brake Caliper Casting MaterialCast Iron
Bleeder Screw IncludedYes
Bleeder Thread DiameterM10x1.0
Mounting Bracket IncludedNo
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Anti-Rattle Spring IncludedNo
Abutment Clips IncludedNo
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Mounting Bolt IncludedNo
Inlet Fitting TypeFemale Straight
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 4GM regularly updates production and service part designs to integrate new materials and technologies
Product DescriptionGM Genuine Parts Disc Brake Calipers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Calipers are hydraulic components mounted over the brake rotor. The caliper acts as a clamp to press the brake pads against the brake rotor when the brakes are applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Casting MaterialCast Iron
Mount Hole Diameter (In)0.315in
Features &#38; Benefits - Bullet 1Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Caliper ColorSilver
Width (In)7.7
Inlet Thread Diameter (Mm)8
Mounting Hardware IncludedNo
Bleeder Screw Thread Diameter (Mm)10
Piston 1 Diameter (In)2.36in
Mount Hole Diameter (Mm)8mm
Height (In)6.2
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).
Length (In)9.7
Caliper Slides IncludedNo
Piston Quantity1
Grade TypeOE
Vendor Part Number13588977
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
