Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Bonded Rear Brake Shoe Set
Part TypeDrum Brake Shoes
BrandACDELCO
Package Height3.8
Package Width8.1
Package Length9.7
Weight6.0 PG
Part CategoryReplacement Parts
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
PositionRear
Programming RequiredNo
Secondary Shoe Friction Material Length(Mm)225
Friction Material Bonding TypeBonded
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Drum Inside Diameter8.86
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Friction Material AttachmentBonded
Secondary Shoe Friction Material Length8.9
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Primary Shoe Friction Material Length (Mm)225mm
Primary Shoe Friction Material Length(Mm)225
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Drum Inside Diameter (In)8.86
Primary Shoe Friction Material Length8.9
Signs Of Wear & Troubleshooting - Section 1 - HeaderBrake shoe signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Faq - Answer 3No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Faq - Answer 2Yes, it is a good idea to inspect your brake fluid often.
Faq - Answer 1No, but it is a good idea to inspect your brake shoes at each tire rotation.
Features & Benefits - Bullet 6Economical value with dependable quality
Features & Benefits - Bullet 7For General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Quality validated for proper metallurgy and correct brake plate thickness
Features & Benefits - Bullet 3Non-directional brake surface finish for consistent braking
Features & Benefits - Bullet 4Available in riveted and bonded for various vehicle applications
Features & Benefits - Bullet 5Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Product DescriptionACDelco Silver (Advantage) Bonded Brake Shoes are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These bonded brakes deliver strong braking power while reducing noise and vibration. The chamfer angle and vane configuration follow the OE design. Also no machining is required. ACDelco Silver (Advantage) Bonded Brake Shoes are ready to be installed right out of the box. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Secondary Shoe Friction Material Length (Mm)225mm
Features &#38; Benefits - Bullet 1Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Width (In)8.12
Mounting Hardware IncludedNo
Height (In)3.62
Brake Shoe Width1.82
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Squealing or grinding noises.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3Low brake pedal height.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Length (In)9.5
Primary Shoe Friction Material Length (In)8.9in
Secondary Shoe Friction Material Length (In)8.9in
Part FitmentDirect Fit
Faq - Question 3Do I have to replace all my brake parts when replacing my brake shoes?
Weight (Lb)6
Faq - Question 2Do I need to check my brake fluid when replacing other brake parts?
Faq - Question 1Do I have to replace my brake shoes after a certain amount of time?
Vendor Part Number14904B
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
