Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Rear Disc Brake Pad Kit with Brake Pads, Clips, and Bolts
Part TypeBrake Pad Set
BrandACDELCO
Package Height3.8
Package Width4.1
Package Length7.3
Weight3.01 PG
Weight4.75
Part CategoryReplacement Parts
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Rear Brake TypeDisc
Brake SystemPower
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Pad Wear Sensor IncludedYes
Friction Material Bonding TypeBonded
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Front Brake TypeDisc
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Brake Pad PositionRear
Friction Material AttachmentBonded
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Chamfered EdgesYes
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Pad Shims IncludedYes
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Abutment Clips IncludedYes
Pad Quantity4
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Features & Benefits - Bullet 6GM regularly updates production and service part designs to integrate new materials and technologies
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 3Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 4GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 5GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Product DescriptionGM Genuine Parts Disc Brake Pads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. This friction-enhancing material is bonded and/or riveted to steel backing plates. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1Integrally molded - friction material molded to backing plate for bond integrity
Pad Wear Sensor TypeMechanical
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Width (In)4.59
Mounting Hardware IncludedYes
Prepared For Pad Wear SensorYes
Height (In)3.69
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
SlottedYes
Length (In)8.88
Part FitmentDirect Fit
Backing MaterialSteel
Friction Surface ScorchedNo
Grade TypeOE
Brake Lubricant IncludedNo
Vendor Part Number171-0870
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
