Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Front Disc Brake Pad Kit with Brake Pads, Clips, Shims, Pins, and Insulator
Part TypeBrake Pad Set
BrandACDELCO
Package Height4.0
Package Width5.25
Package Length6.12
Weight5.14 PG
Part CategoryReplacement Parts
Friction Material Thickness Outer Pad0.45
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Friction Material Thickness Outer Pad (Mm)11.50
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Inner Pad Friction Material Thickness11.5
Friction Material Bonding TypeBonded
Pad Wear Sensor IncludedYes
Brake Pad PositionFront
Inner Pad Friction Material Thickness (In)0.45in
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Friction Material Thickness Inner Pad (Mm)11.50
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Friction Material AttachmentBonded
Friction Material Thickness Inner Pad0.45
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Chirping, grinding, or squeaking noises when braking.
Pad Shims IncludedYes
Signs Of Wear & Troubleshooting - Section 1 - HeaderBrake pad signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner’s manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 3GM-recommended replacement part for your GM vehicle’s original factory component
Features & Benefits - Bullet 4Manufactured to GM OE specification for fit, form, and function
Product DescriptionACDelco GM Original Equipment Disc Brake Pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. This friction-enhancing material is bonded and/or riveted to steel backing plates. These original equipment disc brake pads are manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1Integrally molded - friction material molded to backing plate for bond integrity
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Outer Pad Friction Material Thickness11.5
Mounting Hardware IncludedYes
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Difficulty stopping the vehicle.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3A low or sinking brake pedal.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
Grade TypeOE
Vendor Part Number171-0949
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
