Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededACDELCOPART NUMBER: 065-176-1844
Rear Driver Sid (SLP-1)
$3499
Ships on 09/10/2026
Lowest Price GuaranteePart TypeBrake Hose
BrandACDELCO
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Programming RequiredNo
Shield MaterialNo
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Dot ApprovedYes
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Chirping or grinding noises when braking.
Signs Of Wear & Troubleshooting - Section 1 - HeaderGeneral brake signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Bracket Quantity1
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Grommets IncludedNo
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 4GM regularly updates production and service part designs to integrate new materials and technologies
Product DescriptionGM Genuine Parts Brake Hydraulic Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are quality reinforced hoses that carry fluid to transmit force within the brake system, and are designed to withstand high pressures. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
End 1 Thread Diameter (In)0.394
Bracket MaterialSteel
Features &#38; Benefits - Bullet 1Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
End 2 TypeInverted
End 1 Thread Diameter (Mm)10
End 1 Fitting TypeBanjo
Axis 1 Length290
End 2 Fitting TypeFemale
Bracket IncludedYes
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Gasket Or Seal IncludedNo
End 1 Fitting MaterialSteel
ColorBlack
Width (In)2.6
Overall Length290
Mounting Hardware IncludedYes
Height (In)2.2
Outer Sleeve MaterialEPDM
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Difficulty stopping the vehicle.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3A low or sinking brake pedal.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Length (In)13.5
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
End 2 Fitting MaterialSteel
End 2 Fitting Inside Diameter10
Weight (Lb)0.53
Grade TypeOE
Vendor Part Number176-1844
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
