Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Front Disc Brake Caliper Guide Pin Kit with Guide Pins
Part TypeDisc Brake Caliper
BrandACDELCO
Package Height0.9
Package Width2.1
Package Length4.5
Weight0.33 PG
Part CategoryReplacement Parts
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Rear Brake TypeVarious - Application Specific
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
PositionFront
Brake SystemVarious - Application Specific
Programming RequiredNo
Front Brake TypeVarious - Application Specific
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Pin Outside Diameter8.97
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Pin MaterialSteel
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Bolts IncludedYes
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Bolt Thread Diameter (Mm)14
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Pin Beveled EndsYes
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3Manufactured with GM Original Equipment specification for fit, form, and function
Product DescriptionThe ACDelco GM Original Equipment Disc Brake Caliper Guide Pin Kit contains GM-recommended replacements for your vehicle's original components. This kit includes the necessary bolts, fasteners, bushings, and other hardware where applicable for your vehicle's disc brake caliper applications, which have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1GM-recommended replacement part for your GM vehicle's original factory component
Pin 1 Length3.461
Caliper Grease IncludedYes
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Width (In)2.1
Height (In)0.9
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Length (In)4.5
Bolt Thread TypeFine
Part FitmentDirect Fit
Bolt Thread Diameter (In)0.551
Weight (Lb)0.33
Grade TypeOE
Vendor Part Number179-1370
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
