Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info Needed
Lowest Price GuaranteePart TypeDrum Brake Wheel Cylinder
BrandACDELCO
Package Length4.5
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Programming RequiredNo
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Brake warning light is on.
Brake Line Inlet Thread Diameter (Mm)9.525
Bore Diameter1.125
Bleeder Screw IncludedYes
Signs Of Wear & Troubleshooting - Section 1 - HeaderBrake cylinder signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Faq - Answer 3Yes, ACDelco Professional Brake Cylinders come with a 12 month / unlimited mile warranty.
Faq - Answer 2Yes, ACDelco also offers GM OE brake cylinders.
Faq - Answer 1No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Features & Benefits - Bullet 6Premium aftermarket replacement part
Features & Benefits - Bullet 7Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Pressure tested to ensure safe and confident braking
Meets Or Exceeds Original Equipment Manufacture SpecificationsYes
Features & Benefits - Bullet 3Trivalent coated bleeder screws provide extra protection and added durability
Cylinder Bore Diameter1.125
Features & Benefits - Bullet 4Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Features & Benefits - Bullet 5Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Product DescriptionACDelco Gold (Professional) Drum Brake Wheel Cylinders are a high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings making them a high quality replacement for many vehicles on the road today. These wheel cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. Formulated with a smooth bore finish, these cylinders have a quality seal to help increase the life of rubber components. ACDelco Gold (Professional) Drum Brake Wheel Cylinders are ready to bench bleed and install right out of the box - no assembly required. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Casting MaterialCast Iron
Mount Hole Quantity2
Features &#38; Benefits - Bullet 1Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Width (In)3.3
Mounting Hardware IncludedNo
Brake Line Inlet Thread Diameter (In)0.375
Height (In)2.8
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Bleeder Screw Cap IncludedYes
Attachment TypeBolted
Faq - Question 3Are these brake parts durable?
Weight (Lb)1.46
Faq - Question 2Does ACDelco offer other grades of brake cylinders?
Faq - Question 1Do I have to replace all my brake parts when replacing my brake cylinder?
Vendor Part Number18E463
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
