Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info Needed
Lowest Price GuaranteePart TypeBrake Line
BrandACDELCO
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Width (In)13.88
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Height (In)7.81
Signs Of Wear & Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Length (In)57.31
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Pre-formed and pre-flared for easy installation
Features & Benefits - Bullet 3GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 4Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 5Manufactured to GM OE specification for fit, form, and function
Product DescriptionThe ACDelco GM Original Equipment Hydraulic Brake Line Kits contain metal hydraulic brake pipes. They are made from special double wall steel tube, and the connections are threaded with inverted (SAE) or bubble (ISO) flares, which provide a leak-free connection. These original equipment brake hydraulic lines have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weight (Lb)3.05
Grade TypeOE
Features &#38; Benefits - Bullet 1Nylon Coating for better corrosion protection
Vendor Part Number19419094
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
