Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededACDELCOPART NUMBER: 065-22995250
Rear Driver Sid (SLP-1)
$1083
Ships on 09/10/2026
Lowest Price GuaranteePart TypeBrake Backing Plate
BrandACDELCO
Package Width0.72
Package Length293.4
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Programming RequiredNo
Center Diameter (Mm)96
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3Manufactured with GM Original Equipment specification for fit, form, and function
Product DescriptionACDelco GM Original Equipment Brake Dust Shields protect your wheels from brake pad dust, and are GM-recommended replacements for your vehicle's original components. These brake dust shields have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Diameter12.99
Mount Hole Quantity3
Features &#38; Benefits - Bullet 1GM-recommended replacement part for your GM vehicle's original factory component
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
ColorZinc
Mounting Hardware IncludedNo
MaterialSteel
Center Diameter (In)3.78
Thickness0.039
Height (In)3.25
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Weight (Lb)1.26
Grade TypeOE
Vendor Part Number22995250
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
