
ACDELCOPART NUMBER: 065-84755503
CALIPER ASM-RR (SLP-1)
$11068
Part TypeDisc Brake Caliper
BrandACDELCO
Weight0.01
Pad Wear Sensor IncludedNo
Caliper TypeFloating
Integrated Parking BrakeNo
Disc Brake Caliper Casting MaterialCast Iron
Bleeder Screw IncludedYes
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Crush Washer(S) IncludedNo
Anti-Rattle Spring IncludedNo
Abutment Clips IncludedNo
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Inlet Fitting TypeStraight
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Product DescriptionGM Genuine Parts Disc Brake Calipers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Calipers are hydraulic components mounted over the brake rotor. The caliper acts as a clamp to press the brake pads against the brake rotor when the brakes are applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Casting MaterialCast Iron
Width (In)0.75
Bleeder Screw Thread Diameter (Mm)10
Piston 1 Diameter (In)1.99in
Length (In)1.95
Piston MaterialPhenolic
Caliper Slides IncludedNo
Piston Quantity2
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Pads IncludedNo
Inlet Thread Diameter (In)0.39
Bleeder Screw Quantity1
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Piston 2 Diameter (In)1.99in
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Bleeder Thread DiameterM10x1.5
Mounting Bracket IncludedNo
Mounting Hole Diameter0.4
Mounting Bolt IncludedNo
Features &#38; Benefits - Bullet 2GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features &#38; Benefits - Bullet 3GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features &#38; Benefits - Bullet 4GM regularly updates production and service part designs to integrate new materials and technologies
Features &#38; Benefits - Bullet 1Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Banjo Bolt Quantity0
Casting Number 1L
Bracket IncludedNo
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Caliper ColorSilver
Mounting Hardware IncludedNo
Casting Number 4R
Casting Number 50
Casting Number 2WF
Casting Number 30000
Height (In)0.35
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).
Grade TypeOE
Vendor Part Number84755503
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations