![X-Series Tru-BoostX Boost Controller Gauge Kit w/80 PSIg Internal MAP Sensor [Black Bezel, Black Face]](https://www.jegs.com/images/mini_750/0/017/017-30-0352.jpg)
AEM ELECTRONICSPART NUMBER: 017-30-0352
X-Series Tru-BoostX Boost Controller Gauge Kit w/80 PSIg Internal MAP Sensor [Black Bezel, Black Face]
$35895$399.95You Save$41.00
4 left in stockGauges
Boost Controller Gauge KitUniversal Fit for Turbocharged Engines Internal 80 PSIg MAP Sensor 2-1/16 in. Diameter, 0.825 in. Deep Two Boost Levels Plus Scramble Boost Boost Control Solenoid Included Black Bezel and Face Sold as a Kit
The Tru-BoostX combines a boost gauge and an electronic boost controller in a single 2-1/16 in. unit that is programmed from the faceplate buttons, with no laptop needed. An on-board 80 psig MAP sensor covers high-boost builds without a sensor upgrade, and AEMnet CANbus lets the gauge pass data to an EMS or data logger.
AEM 30-0352 Tru-BoostX Features:
- Slim design is 0.825 in. deep overall with a 0.200 in. cup depth.
- 2-1/16 in. (52 mm) diameter mounts in standard gauge pods.
- The programmable center LED is 87% larger than on the original AEM gauges, and 24 green outer LEDs give a quick read on the engine parameter.
- Two boost level settings plus a scramble boost setting.
- A wastegate open pressure setting helps control boost spikes and spool.
- Boost displays in PSI, BAR or kPa.
- Overboost protection and programmable alarms are built in, with a ground output for an optional LED warning light.
- The boost control solenoid and necessary hardware are included.
Part TypeGauge
BrandAEM ELECTRONICS
Package Height5.4
Package Width5.4
Package Length5.4
Weight1.45 PG
Part CategoryPerformance Parts
Product TypeGauge
Part FitmentUniversal
Vendor Part Number30-0352
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations