Non-Resonated Touring Edition Exhaust for G2X M340i / M440i - OE Tips
InfoVehicle Info Needed
AWE EXHAUSTPART NUMBER: 090-3015-11058

Non-Resonated Touring Edition Exhaust for G2X M340i / M440i - OE Tips

$2,15500
ShippingShips on Sep 16, 2026
Lowest PriceLowest Price Guarantee

BMW
Touring Edition Exhaust
  • AWE Non-Resonated Touring Edition Exhaust for G2X M340i / M440i - OE Tips
  • 65% more flow than stock -- ready for big power
  • Max gains of 16 hp and 12 lb-ft of torque at the wheels (stock software)

    3015-11058 Features:

    Presenting The Best Sounding Exhausts on the Planet for the BMW G20 M340i: At the intersection of sophistication and aggression lies the Touring Edition Exhaust. A dual 3” T304L stainless steel downpipe-back configuration, the AWE Touring Edition Exhaust is the perfect dose of steel for drivers looking for straight-pipe performance while not sacrificing daily drivability: a deep, sophisticated exhaust note with zero drone at highway speeds. Featuring a stamped stainless steel merge upstream equivalent to dual 3” tubing coming right off of the downpipe. Translation: an impressive 65% increase in flow over stock that future proofs for downpipes of various sizes. Beyond the unique merge, the exhaust splits into dual 3” piping to allow optimal flow throughout the entire exhaust route. Bringing up the rear, the Touring Edition features AWE’s patented drone-canceling solution, 180 Technology, which targets and omits drone-prone frequencies. What’s this mean for you? You’ll be tuned into a pure, full-bodied B58 soundtrack unlike any other. Equipping a downpipe? Read this (seriously): The Touring Edition Exhaust is available as non-resonated or resonated. We recommend the non-resonated variant for vehicles equipped with the stock downpipe. If your M340i is equipped with an aftermarket downpipe, we recommend going resonated. Have the stock downpipe but plan to go aftermarket later? No worries, you can swap in the resonated midsections with ease via an AWE Resonator Conversion Kit.

    • Features AWE's patented drone-canceling 180 Technology
    • Handcrafted from 3-inch CNC mandrel-bent, U.S.-made .065-inch wall T304L stainless steel
    • Non-resonated mid pipes
    • Features a mid-pipe inlet adapter to allow use with stock and aftermarket downpipes (with outlets of 80mm)
    • Direct bolt-on, no cutting
    • Perfect fitment guaranteed
    • AWE No CEL guarantee
    • Lifetime Warranty
    • Proudly engineered, designed, and manufactured in-house at AWE
    • 180 Technology: Yes
    • 50 State Legal: Yes
    • Edition: Touring Edition
    • Fit Gurantee: Yes
    • Material: T304L Stainless Steel
    • No CEL Guarantee: Yes
    • System Type: Cat Back
    • Tip Finish: Stock Tips
    • Tip Qty: 0
    • Tune Required: No
    • Valves: No
  • Part TypeExhaust System
    BrandAWE EXHAUST
    Package Height11.0
    Package Width19.0
    Package Length68.0
    Weight70.0 PG
    Vendor Part Number3015-11058
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    123-Piece Tool Set with Carry Case

    JEGS

    123-Piece Tool Set with Carry Case

    Part Number : 555-80427
    $4659$51.99
    You Save$5.40
    2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

    JEGS

    2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]

    Part Number : 555-80006
    $24499$269.99
    You Save$25.00
    6-Ton Jack Stands

    JEGS

    6-Ton Jack Stands

    Part Number : 555-80037
    $8099
    Wheel Chock [Solid Rubber]

    JEGS

    Wheel Chock [Solid Rubber]

    Part Number : 555-W41001
    $1299$14.99
    You Save$2.00
    5 in. Deep Cut Portable Band Saw

    JEGS

    5 in. Deep Cut Portable Band Saw

    Part Number : 555-95722
    $10999$141.99
    You Save$32.00
    Punch and Chisel Set 28 Piece Set

    JEGS

    Punch and Chisel Set 28 Piece Set

    Part Number : 555-W754
    $6799$74.99
    You Save$7.00
    20V 3/8" Drive Li-Ion Cordless Impact Wrench

    OEMTOOLS

    20V 3/8" Drive Li-Ion Cordless Impact Wrench

    Part Number : 693-24661
    $10995
    5-Piece Pry Bar Set

    JEGS

    5-Piece Pry Bar Set

    Part Number : 555-80024
    $2669$28.99
    You Save$2.30
    Round Magnetic Parts Tray [5 1/2 in. Round]

    JEGS

    Round Magnetic Parts Tray [5 1/2 in. Round]

    Part Number : 555-80080
    $549$5.99
    You Save$0.50
    Large Tailpipe Expander 2-1/8" to 3-7/16"

    JEGS

    Large Tailpipe Expander 2-1/8" to 3-7/16"

    Part Number : 555-W80662
    $3999$43.99
    You Save$4.00
    Medium Tailpipe Expander 1-1/2" to 2-7/16"

    JEGS

    Medium Tailpipe Expander 1-1/2" to 2-7/16"

    Part Number : 555-W80661
    $3699$40.99
    You Save$4.00
    Exhaust Pipe Cutter

    JEGS

    Exhaust Pipe Cutter

    Part Number : 555-81393
    $3679$39.99
    You Save$3.20
    Cut-Off Wheels [3 in. Diameter, Set of 4]

    JEGS

    Cut-Off Wheels [3 in. Diameter, Set of 4]

    Part Number : 555-M580C
    $599$6.99
    You Save$1.00
    LED Drop Light with Built-In 120V Outlet

    JEGS

    LED Drop Light with Built-In 120V Outlet

    Part Number : 555-W2237
    $2899$31.99
    You Save$3.00
    60 LED Work Light

    JEGS

    60 LED Work Light

    Part Number : 555-81927
    $2569$31.99
    You Save$6.30
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!